Siemens SIPLUS ET 200S, 6AG1131-4BF00-7AA0, 8 digital inputs, 24 V DC, 15 mm width, conformal coating, -25 to +70 °C.
| Parameter | Value |
|---|---|
| Digital inputs | 8 |
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Power loss (typ.) | 1.2 W |
| Parameter | Value |
|---|---|
| Installation altitude, max. | 5 000 m |
| Temperature, min. | -25 °C; = Tmin |
| Temperature, max. | 70 °C; = Tmax |
| Ambient temperature vs. altitude/pressure derating | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Parameter | Value |
|---|---|
| Width | 15 mm |
| Height | 81 mm |
| Depth | 52 mm |
| Weight (approx.) | 35 g |
The 6AG1131-4BF00-7AA0: Eight DC inputs, 24 V, delay 2 to 4.5 ms. Typical power loss 1.2 W, reverse polarity protection, backplane current max 10 mA.
No outputs, no encoder supply, no diagnostics — this is a pure input module for dry contact or 2-wire sensor monitoring. The address space is 1 byte per module. Maximum cable length: 1 000 m shielded, 600 m unshielded. CE marked, and the ambient conditions cover up to 5 000 m altitude with derating above 2 000 m.
Rated for -25 °C to +70 °C with conformal coating. At higher altitudes above 2 000 m the upper limit derates.
Eight digital inputs, 24 V DC, with input delay between 2 ms and 4.5 ms. Suitable for 2-wire sensors.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles