BOM / RFQ

Siemens 6AG1131-6FD01-7BB1 — PLCs (Programmable Logic Controllers)

Siemens 6AG1131-6FD01-7BB1 SIPLUS DI, 8x AC 230V

MPN6AG1131-6FD01-7BB1

Active

Siemens SIPLUS ET 200SP, 6AG1131-6FD01-7BB1 Digital Input Module, 8 inputs (1 byte + QI), AC 230 V rated, 20 mm width, 1 W, current production.

Add to RFQ

Siemens 6AG1131-6FD01-7BB1 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1131-6FD01-7BB1 — I/O
Parameter	Value
Digital inputs	4
Input data area	1 byte; + 1 byte for QI information

6AG1131-6FD01-7BB1 — Electrical
Parameter	Value
Current consumption (rated)	10 mA
Power loss (typ.)	1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz
Short-circuit protection	No; when using BU type B1, a fuse with 10 A tripping current must be provided

6AG1131-6FD01-7BB1 — Environmental
Parameter	Value
Installation altitude, max.	2 000 m
Operating temperature, min. (horizontal mounting)	-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)	70 °C; = Tmax
Ambient temperature vs. altitude/pressure derating	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)

6AG1131-6FD01-7BB1 — Mechanical
Parameter	Value
Width	20 mm
Height	73 mm
Depth	58 mm
Weight (approx.)	36 g

Product details

The 6AG1131-6FD01-7BB1 SIPLUS ET 200SP DI module accepts 74–264 V AC for logic high, draws 1 W typical at 230 V, 50 Hz, and is isolation tested at 2 545 V DC. It mounts on a BU type B1 base unit, 20 mm wide.

Because it's a SIPLUS module, the housing is coated for condensation and aggressive gases, but the mounting follows standard ET 200SP rules. Plug it into a BU type B1 base unit — the module is automatically encoded when seated. The 20 mm width and 73 mm height keep your rail layout predictable. Wire the AC supply to the appropriate terminals on the base; the module handles the signal conversion.