This 6AG1132-4HB13-2AB0 is a SIPLUS ET 200S electronic module carrying two relay outputs, each rated 5 A for signal '1' and 5 A thermal continuous current. It is the conformally coated, extended-temperature variant (−40 to +60 °C) of the standard 6ES7132-4HB13-0AB0.
Dimensions are 15 mm wide × 81 mm high × 52 mm deep, mounting as a standard ET 200S electronic module. Reverse polarity protection is built in on the backplane side, but the relay outputs themselves lack short-circuit protection — an external fuse or breaker per channel is required for the load circuit. No diagnostic function is present; status indication is a green LED per output. On CPU/master STOP the module can substitute a value (0 or 1, configurable) or keep the last state, which matters for fail-safe system design. Galvanic isolation exists between channels and backplane bus as well as between channels and load voltage L+, enabling mixed-load wiring in the same assembly.