Skip to main content
Log in
Siemens 6AG1132-6BF61-7AA0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1132-6BF61-7AA0 SIPLUS DQ Module, 4 A

MPN6AG1132-6BF61-7AA0
Active

Siemens SIPLUS S7-1500, digital output module, 6AG1132-6BF61-7AA0, 4 A, 24 V DC, one byte, DQ Yes.

Siemens 6AG1132-6BF61-7AA0 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

6AG1132-6BF61-7AA0 — I/O
ParameterValue
Digital outputs8
Output data area1 byte
6AG1132-6BF61-7AA0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, lower limit (DC)19.2 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)1.5 W
Short-circuit protectionYes
6AG1132-6BF61-7AA0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)70 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1132-6BF61-7AA0 — Mechanical
ParameterValue
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)30 g

Product details

Installation & Integration

The 6AG1132-6BF61-7AA0: 15 mm wide, 73 mm high, 58 mm deep. Slips onto any S7-1500 DIN rail; locks with the standard backplane connector. Wiring: PNP sourcing, max cable length 1 000 m shielded, 600 m unshielded. Load range 48 Ω to 3 400 Ω per channel. Switching speed: 300 µs on, 600 µs off. No isochronous mode, no oversampling—fine for discrete valve or indicator control. Use the BU type A0 base unit for mounting.

Design Notes

Isolation tested at 707 V DC. Module diagnostics via green/red LED and channel status green LED; redundancy capable; no firmware update; no wire-break or short-circuit per channel but diagnostic alarm exists.

Frequently asked questions

What is the physical size and mounting?

Width 15 mm, height 73 mm, depth 58 mm. Mounts on S7-1500 DIN rail with BU type A0 base units.

Does this module support diagnostics?

Yes, it has a diagnostic alarm, module diagnostic LED (green/red), and channel status green LED per output. No wire-break or short-circuit detection per channel.

MPN
6AG1132-6BF61-7AA0