BOM / RFQ

Siemens 6AG1132-6HD00-7BB1 — PLCs (Programmable Logic Controllers)

Siemens 6AG1132-6HD00-7BB1 SIPLUS S7-1500 DQ 4x5A

MPN6AG1132-6HD00-7BB1

Siemens SIPLUS S7-1500 digital output module, 6AG1132-6HD00-7BB1, 4 relay outputs, 5 A per channel, 24 V DC, diagnostic alarm, 20 mm width.

Add to RFQ

Siemens 6AG1132-6HD00-7BB1 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1132-6HD00-7BB1 — I/O
Parameter	Value
Digital outputs	4
Input data area	1 byte; With QI
Output data area	1 byte

6AG1132-6HD00-7BB1 — Electrical
Parameter	Value
Rated value (DC)	24 V
Permissible range, lower limit (DC)	19.2 V
Permissible range, upper limit (DC)	28.8 V
Power loss (typ.)	1.5 W
Short-circuit protection	No

6AG1132-6HD00-7BB1 — Environmental
Parameter	Value
Installation altitude, max.	3 000 m
Operating temperature, min. (horizontal mounting)	-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)	70 °C; = Tmax; see Derating BasedOn (e.g. manual), additionally Tmax > 60 °C max. continuous current of 3 A per relay
Ambient temperature vs. altitude/pressure derating	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... Tmax -5K) at 795 hPa ... 701 hPa (+2 000 m ... +3 000 m)

6AG1132-6HD00-7BB1 — Mechanical
Parameter	Value
Width	20 mm
Height	73 mm
Depth	58 mm
Weight (approx.)	40 g

Product details

4‑way relay output module for the S7‑1500

Siemens SIPLUS S7-1500 digital output module 6AG1132-6HD00-7BB1 packs 4 relay outputs rated 5 A per channel at 24 V DC. Diagnostic alarm and group error reporting are standard, with a green LED per channel and a green/red DIAG LED for module status.

Mounting and wiring parameters

Unshielded cable runs up to 200 m; shielded up to 1 000 m. Minimum switching current is 100 mA at 5 V DC, and each channel handles inductive loads up to 2 A; module total is 20 A derated to 60 °C.