Two-Channel Analog Output for ET 200SP
The Siemens SIPLUS 6AG1135-6HB00-7CA1 is a 2-channel analog output module for the ET 200SP distributed I/O system. It covers voltage and current ranges with 16-bit resolution on the ±10 V range, 15-bit on 0–10 V and ±20 mA, and 14-bit on 4–20 mA. Jitter is rated at 5 µs, making it suitable for isochronous mode applications. Power consumption is 0.9 W typical. The module mounts on BU type A0 or A1 base units.
Wiring and Diagnostics
Each output channel can be independently configured for voltage or current. Wire-break detection works only on current outputs; short-circuit detection only on voltage outputs. Reaction time is 0.05 ms for resistive, inductive, and capacitive loads (capacitive limited to 20 m cable length and 47 nF). Diagnostic alarm, group error, and channel-specific red LED indicators are included. I&M0–I&M3 data is stored for asset tracking. Isolation is tested at 707 V DC type test.