Module overview
This 6AG1136-6DB00-2CA0 is a SIPLUS ET 200SP digital output module delivering transistor outputs at 24 V DC nominal. It provides 5-byte input and 5-byte output data to the controller, with each channel rated for 2 A continuous (derated per ambient). The module draws 21 mA from the backplane bus and dissipates 4 W typical. Overload and short-circuit protection are built in, with a typical response threshold of 2.9 A. Open-circuit detection is supported for each channel. Diagnostic alarms and a red ERROR LED enable fast fault isolation.
Thermal and mounting considerations
Shielded cable runs up to 1 000 m; unshielded up to 500 m. Load resistance: 12 Ω min, 2 000 Ω max.
Lifecycle and sourcing
Compliance documentation is issued by Siemens upon shipment; the module carries a type test isolation of 707 V DC.