Skip to main content
Log in
Siemens 6AG1136-6DC00-2CA0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1136-6DC00-2CA0 SIPLUS ET200SP 8DO, 0.5A

MPN6AG1136-6DC00-2CA0
Active

Siemens SIPLUS ET200SP 6AG1136-6DC00-2CA0, 8-channel digital output transistor module, 24 V DC, 0.5 A per channel, BU type A0, active production.

Siemens 6AG1136-6DC00-2CA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1136-6DC00-2CA0 — I/O
ParameterValue
Digital outputs8
Input data area6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
Output data area6 byte; 5 bytes non-RIOforFA; 6 bytes RIOforFA
6AG1136-6DC00-2CA0 — Electrical
ParameterValue
Rated value (DC)24 V
Current consumption (rated)75 mA; without load
Permissible range, lower limit (DC)20.4 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)3 W
Short-circuit protectionYes
6AG1136-6DC00-2CA0 — Environmental
ParameterValue
Installation altitude, max.4 000 m
Operating temperature, min. (horizontal mounting)-30 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module
Ambient temperature vs. altitude/pressure deratingRestrictions for installation altitudes > 2 000 m, see entry ID: 109771992
6AG1136-6DC00-2CA0 — Mechanical
ParameterValue
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)48 g

Product details

The Siemens 6AG1136-6DC00-2CA0 is an 8-output transistor module for the ET 200SP distributed I/O system, part of the SIPLUS range. It switches 24 V DC loads at up to 0.5 A per channel, with a total module current of 3 A (derated at higher temperatures). Rated SIL 3, includes per-channel diagnostics (short-circuit protection, diagnostic alarm) and a red error LED. It uses BaseUnit type A0, so it mounts directly in any ET 200SP station and accepts the same terminal blocks as the standard 6ES7136-6AB00-0CA1.

Integration Notes for Panel Builders

Width is 15 mm (one slot), depth 58 mm, height 73 mm. The module fits in a standard ET 200SP rail with adjacent slots; observe left/right slot configuration when exceeding 60 °C ambient. Current per channel is 0.5 A maximum; at 50 °C the module derates to 2 A total, and at 70 °C it requires configured slots on both sides. Plan the thermal layout accordingly. Unshielded cable runs up to 100 m; diagnostics respond at a minimum load current of 0.7 A for open-circuit detection. Short-circuit protection is built in. Firmware update via the backplane is supported; I&M data (I&M0 to I&M3) can be written for asset tracking.

Frequently asked questions

What is the closest functional second-source — 6ES7136-6AB00-0CA1?

The standard ET 200SP output module 6ES7136-6AB00-0CA1 is functionally equivalent (8× 0.5 A, same diagnostics and base unit), but lacks the SIPLUS wide-temperature rating and conformal coating. It is a direct mechanical and electrical replacement for non-harsh environments.

Will 6AG1136-6DC00-2CA0 drop into a panel specified around 6ES7136-6AB00-0CA1 without rewiring?

Yes — both modules use the same BU type A0 base unit, same terminal assignments, and same width. No rewiring or mechanical changes are needed.

What is the module's width and depth?

Width is 15 mm (one slot), depth is 58 mm.

MPN
6AG1136-6DC00-2CA0