Skip to main content
Log in
Siemens 6AG1136-6PA00-2BC0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1136-6PA00-2BC0 SIPLUS ET200SP DIO, 24V

MPN6AG1136-6PA00-2BC0
Active

Current-production SIPLUS ET200SP digital I/O module, 2 inputs / 2 outputs, 24 V DC, 7 byte input and 5 byte output process image, diagnostic alarm, 20 x 72 x 55 mm, BU Type C0 base unit.

Siemens 6AG1136-6PA00-2BC0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1136-6PA00-2BC0 — I/O
ParameterValue
Digital inputs2
Digital outputs1
Input data area7 byte
Output data area5 byte
6AG1136-6PA00-2BC0 — Electrical
ParameterValue
Rated value (DC)24 V
Current consumption (rated)75 mA; without load
Permissible range, lower limit (DC)20.4 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)5 W
Short-circuit protectionYes
6AG1136-6PA00-2BC0 — Environmental
ParameterValue
Installation altitude, max.4 000 m
Operating temperature, min. (horizontal mounting)-30 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module
Ambient temperature vs. altitude/pressure deratingRestrictions for installation altitudes > 2 000 m, see entry ID: 109771992
6AG1136-6PA00-2BC0 — Mechanical
ParameterValue
Width20 mm
Height72 mm
Depth55 mm
Weight (approx.)70 g

Product details

Integrator’s first look

The 6AG1136-6PA00-2BC0: Input thresholds follow the standard 24 V P-reading logic: signal 0 is -30 to +5 V, signal 1 is +15 to +30 V (typical 3.7 mA). Response times are 0.4 ms min to 20 ms max in either direction, so it’s fine for fast digital sensing.

Diagnostic alarm is available via the backplane if your project uses it. I&M data from I&M0 through I&M3 is on board, so asset management and version tracking are straightforward. Firmware updates are possible in the field, and A&E (automatic encoding) handles the slot addressing without DIP switches. Between-channel isolation is not provided, so watch for voltage differences on shared supplies. The ERROR LED (red) and RUN LED (green) give on-module status at a glance.

Frequently asked questions

What are the physical dimensions?

Depth 55 mm, width 20 mm, height 72 mm. It occupies one slot on a BU Type C0 base unit.

MPN
6AG1136-6PA00-2BC0