Skip to main content
Log in
Siemens 6AG1136-6RA00-2BF0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1136-6RA00-2BF0 Relay Output Module, 1 Relay 2NO

MPN6AG1136-6RA00-2BF0
Active

Siemens SIPLUS S7-1200 digital output module, 1 relay output (2 NO contacts), 24 V DC rated supply, 230 V AC switching, 5 A at 40 °C, 90 g.

Siemens 6AG1136-6RA00-2BF0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1136-6RA00-2BF0 — I/O
ParameterValue
Digital outputs1
Input data area1 byte
6AG1136-6RA00-2BF0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, lower limit (DC)20.4 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)1 W
6AG1136-6RA00-2BF0 — Environmental
ParameterValue
Installation altitude, max.2 000 m
Operating temperature, min. (horizontal mounting)-30 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m)
6AG1136-6RA00-2BF0 — Mechanical
ParameterValue
Width20 mm
Height73 mm
Depth58 mm
Weight (approx.)90 g

Product details

Relay Output Module for S7-1200 SIPLUS Line

The Siemens 6AG1136-6RA00-2BF0 is a SIPLUS S7-1200 digital output module with one relay output, two normally open contacts. It switches resistive or inductive loads up to 230 V AC (rated switching voltage) and 24 V DC, with a minimum switching current of 1 mA. Supply is 24 V DC, typical power loss 1 W. The module carries I&M data (I&M0–I&M3) and firmware update capability. Diagnostics are supported, with channel status and a combined green/red DIAG LED.

Temperature Derating – What the Ratings Mean

Horizontal installation supports up to 60 °C standard, 70 °C with empty left/right slots. Vertical installation max is 50 °C. Minimum ambient for both is -30 °C (including condensation/frost).

Safety and Isolation

Module is SIL 3, isolation tested at 2 545 V DC for 2 s, relay output rated B300 and R300, and channel-to-channel isolation for SELV/PELV only.

Frequently asked questions

Does this module support diagnostics?

Yes, diagnostics are supported, including channel status display and a DIAG LED. I&M data up to I&M3 is available.

MPN
6AG1136-6RA00-2BF0