BOM / RFQ

Siemens 6AG1137-6AA00-2BA0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1137-6AA00-2BA0 Serial Comm Module, 15mm Width

MPN6AG1137-6AA00-2BA0

Siemens 6AG1137-6AA00-2BA0, Serial Communication Module, S7-1200/1500, RS232/422/485, 15 mm width, 58 mm depth, 24 V DC.

$619.65Ref. price · indicative, final on quote

Add to RFQ

Siemens 6AG1137-6AA00-2BA0 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1137-6AA00-2BA0 — I/O
Parameter	Value
Input data area	8 byte

6AG1137-6AA00-2BA0 — Electrical
Parameter	Value
Rated value (DC)	24 V
Current consumption (rated)	29 mA
Permissible range, lower limit (DC)	19.2 V
Permissible range, upper limit (DC)	28.8 V
Power loss (typ.)	0.7 W

6AG1137-6AA00-2BA0 — Environmental
Parameter	Value
Installation altitude, max.	5 000 m
Operating temperature, min. (horizontal mounting)	-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)	60 °C; = Tmax
Ambient temperature vs. altitude/pressure derating	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

6AG1137-6AA00-2BA0 — Mechanical
Parameter	Value
Width	15 mm
Height	73 mm
Depth	58 mm
Weight (approx.)	30 g

Product details

The 6AG1137-6AA00-2BA0: Rated for 24 V DC with reverse polarity protection, it consumes 0.7 W typical and is isolated to 707 V DC type test. Diagnostics include wire-break detection, diagnostic alarm, and a green/red DIAG LED.

Integration Notes

The 15 mm width allows dense packing on a DIN rail; allow clearance for cable connectors accounting for the 58 mm depth. Configuration of address area (1–247 or extended 1–65535), parity, stop bits, and baud rate is done via the engineering software. 4-wire full duplex and multipoint connections are supported. The module provides RS232 auxiliary signals (RTS, CTS, DTR, DSR, RI, DCD) and a 4 kbyte buffer memory for telegrams.