Skip to main content
Log in
Siemens 6AG1137-6BD00-2BA0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1137-6BD00-2BA0 IO-Link Master, 4 ports, 24 VDC

MPN6AG1137-6BD00-2BA0
Active

Siemens 6AG1137-6BD00-2BA0 IO-Link Master, 4 ports, 24 V DC, 700 mA per channel, width 15 mm, lifecycle current.

$275.59Ref. price · indicative, final on quote
Siemens 6AG1137-6BD00-2BA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1137-6BD00-2BA0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, lower limit (DC)19.2 V; 20.5 V if IO-Link is used, as the supply voltage for IO-Link devices has to be at least 20 V at the master.
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)1 W
Short-circuit protectionYes
6AG1137-6BD00-2BA0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)60 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1137-6BD00-2BA0 — Mechanical
ParameterValue
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)30 g

Product details

The 6AG1137-6BD00-2BA0 is a 4-port IO-Link master module in the Siemens TIA selection, powered at 24 VDC and rated 700 mA per channel for sensor/actuator supply. Transmission rates: 4.8 kBaud (COM1), 38.4 kBaud (COM2), and 230.4 kBaud (COM3). Each port provides diagnostics, short-circuit protection, and wire-break detection, with a green/red LED per channel for status. Digital inputs (DI=Yes) and digital outputs (DQ=Yes, max. 100 mA per channel) are integrated, along with I&M data support for I&M0 to I&M3.

Integration constraints

Isochronous mode and TIO IO-Link IN/OUT are not supported on this module; these features are available only for PROFINET variants with firmware V2.0 or V2.1. The module mounts using BU type A0 base units. Port type B requires a 24 VDC external terminal. Maximum unshielded cable length is 20 m, which also applies to shielded. Power consumption without load is 45 mA max; total output current across all channels is limited to 2.1 A.

Frequently asked questions

What are the key specifications for DI and DQ?

DI (digital inputs) is supported (Yes). DQ (digital outputs) is supported with a maximum of 100 mA per channel.

What transmission rates does this IO-Link master support?

It supports COM1 (4.8 kBaud), COM2 (38.4 kBaud), and COM3 (230.4 kBaud).

Does this module support I&M data?

Yes, it supports I&M0 through I&M3 for device identification and asset management.

MPN
6AG1137-6BD00-2BA0