Siemens 6AG1137-6EA00-2BA0 CAN interface module for ET 200SP, 15 mm wide, 24 V DC, push-in terminals, 1 Mbit/s.
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Power loss (typ.) | 0.5 W |
| Parameter | Value |
|---|---|
| Installation altitude, max. | 5 000 m |
| Operating temperature, min. (horizontal mounting) | -40 °C; = Tmin (incl. condensation/frost) |
| Operating temperature, max. (horizontal mounting) | 60 °C; = Tmax; +70 °C with configured empty slots to the left and right of the module |
| Ambient temperature vs. altitude/pressure derating | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Parameter | Value |
|---|---|
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight (approx.) | 32 g |
| Parameter | Value |
|---|---|
| Interface type | CAN according to CiA 303-1 |
The 6AG1137-6EA00-2BA0: CAN interface module for the ET 200SP distributed I/O system. One CANopen master/slave port compliant with CiA 301 and 302, with SYNC support and 128 PDOs. Runs on 24 V DC, drawing 20 mA typical. The 15 mm width fits tight DIN-rail builds without eating up slot real estate.
Mounts on a BU type A0 base unit with push-in terminals; depth is 58 mm. Diagnostic LEDs for RUN, ERROR, and heartbeat (MAINT LED absent); firmware updates supported over the CAN interface.
SYNC is supported, enabling synchronized data exchange across the CANopen network. It works with both CAN 2.0A and 2.0B.
15 mm wide, 58 mm deep, 73 mm high. Fits any ET 200SP slot with a BU type A0 base unit.
CE mark and RoHS conformity are confirmed. No UL or REACH claims in the listing.
No related articles