Siemens SIPLUS ET 200S IM 151-1 interface module, 6AG1151-1AA06-7AB0, with conformal coating, -25 to 70°C, PROFIBUS DP, 12 Mbit/s.
| Parameter | Value |
|---|---|
| Input data area | 244 byte |
| Output data area | 244 byte |
| Parameter | Value |
|---|---|
| Power loss (typ.) | 3.3 W |
| Parameter | Value |
|---|---|
| Installation altitude, max. | 5 000 m |
| Temperature, min. | -25 °C; = Tmin |
| Temperature, max. | 70 °C; = Tmax |
| Ambient temperature vs. altitude/pressure derating | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Parameter | Value |
|---|---|
| Width | 45 mm |
| Height | 119.5 mm |
| Depth | 75 mm |
| Weight (approx.) | 150 g |
The 6AG1151-1AA06-7AB0 is a SIPLUS version of the standard IM 151-1 interface module, built for the ET 200S distributed I/O family.
Lifecycle is current production; no phase-out notice issued. Standard-shelf part, quoted to order.
Diagnostics are on-board: group error (SF red), bus fault (BF red), and supply voltage (green). FREEZE and SYNC capability, direct data exchange (slave-to-slave) are supported. No isochronous mode.
The SIPLUS version works from -25 to 70°C.
A CE mark is listed, along with environmental robustness per ANSI/ISA-71.04.
No related articles