BOM / RFQ

Siemens 6AG1151-1BA02-2AB0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1151-1BA02-2AB0 SIPLUS IM 151 HF, -25..60°C

MPN6AG1151-1BA02-2AB0

Siemens SIPLUS ET 200S IM 151 HF interface module, 6AG1151-1BA02-2AB0, PROFIBUS DP, conformal coated, -25…+60 °C, 12 Mbit/s, 3.3 W.

Add to RFQ

Siemens 6AG1151-1BA02-2AB0 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1151-1BA02-2AB0 — I/O
Parameter	Value
Input data area	244 byte
Output data area	244 byte

6AG1151-1BA02-2AB0 — Electrical
Parameter	Value
Power loss (typ.)	3.3 W

6AG1151-1BA02-2AB0 — Environmental
Parameter	Value
Installation altitude, max.	5 000 m
Temperature, min.	-25 °C; = Tmin
Temperature, max.	60 °C; = Tmax
Ambient temperature vs. altitude/pressure derating	Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)

6AG1151-1BA02-2AB0 — Mechanical
Parameter	Value
Width	45 mm
Height	119.5 mm
Depth	75 mm
Weight (approx.)	150 g

Product details

The 6AG1151-1BA02-2AB0: This is a ruggedized SIPLUS variant of the standard ET 200S IM 151 interface module, built with conformal coating to handle condensing atmospheres, salt spray, and corrosive gas levels up to EN 60721-3-3 class 3C4. It carries full PROFIBUS DP functionality at up to 12 Mbit/s, including isochronous mode, SYNC, FREEZE, and slave-to-slave direct data exchange. Power draw is 3.3 W typical, with a maximum supply current of 200 mA from 1L+. Isolation between PROFIBUS and electronics is tested at 500 V DC, and the module carries both CE and UL approvals.

This module carries CE mark and UL approval. The conformal coating is factory-applied.