The 6AG1151-7AA20-7AB0 is a SIPLUS DP master module (type SFB) for the ET 200S distributed I/O system. It handles Profibus DP V1 communication with an RS485 isolated interface, supporting routing and SYNCFREEZE. This means it acts as the bus master for up to 12 DP slaves, with 244 bytes each of input and output data — enough for a medium-sized drop. Programming language support is a key differentiator: FBD, LAD, and STL are standard; SCL and GRAPH are available as optional add-ons. That flexibility means it can be integrated into plants with mixed engineering toolchains — whether your team uses Ladder for simple logic or STL for complex sequences, this module accepts all three without firmware changes.
Real-world fit and constraints
Physical dimensions: 60 mm wide, 119.5 mm high, 75 mm deep — the standard ET 200S module footprint. It occupies one slot on the terminal module; rail clearance matches the ET 200S system. Backup time for retentive data is 6 weeks at 40 °C typical; after a power failure with battery flat, the module requires a restart to reinstate retentive variables. No MPI support; communication is via Profibus DP RS485 isolated interface. Routing is supported; client mode is not.