Skip to main content
Log in
Siemens 6AG1155-6BA00-7CN0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1155-6BA00-7CN0 SIPLUS PROFIBUS DPV1, 12 Mbit

MPN6AG1155-6BA00-7CN0

Siemens SIPLUS 6AG1155-6BA00-7CN0, PROFIBUS DP slave, DPV1, 12 Mbit/s, 24 VDC, 1.5 W, -40 to 70 °C, active.

$1,450.47Ref. price · indicative, final on quote
Siemens 6AG1155-6BA00-7CN0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1155-6BA00-7CN0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, lower limit (DC)19.2 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)1.5 W
6AG1155-6BA00-7CN0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C
Operating temperature, max. (horizontal mounting)70 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1155-6BA00-7CN0 — Mechanical
ParameterValue
Width50 mm
Height117 mm
Depth74 mm
Weight (approx.)150 g

Product details

PROFIBUS DP slave for extended conditions

The 6AG1155-6BA00-7CN0: It draws up to 250 mA from 24 VDC (19.2 to 28.8 V permissible), with a typical power loss of 1.5 W. Reverse polarity protection and a 5 ms ride-through on supply failure are built in. The module includes diagnostic functions, alarm generation (process and diagnostic), FREEZE and SYNC capabilities, and I&M data (I&M0 to I&M3) for asset tracking. Status indicators: RUN (green), ERROR (red), MAINT (yellow), and a green DP connection LED. PWR-LED monitors supply voltage. Rated isolation between supply and all other circuits is 707 V DC type test, with base isolation of 75 V DC / 60 V AC between different circuits.

Lifecycle and sourcing status

The extended temperature rating (-40 to 70 °C horizontal, -40 to 50 °C vertical with startup at -25 °C) means it is suited for unheated cabinets or outdoor cabinets in demanding environments.

Frequently asked questions

What PROFIBUS DP versions does this module support?

It supports DPV1 (acyclic communication and alarms) but lists DPV0 as not supported. The single PROFIBUS interface runs up to 12 Mbit/s.

What are the key specifications for the 6AG1155-6BA00-7CN0?

It is a PROFIBUS DP slave with DPV1, 12 Mbit/s max transmission rate, 24 VDC supply (19.2 to 28.8 V), 1.5 W typical loss, 250 mA max current, extended temperature range -40 to 70 °C horizontal, I&M data, alarms, diagnostics, FREEZE and SYNC, and a 5 ms power failure ride-through.

MPN
6AG1155-6BA00-7CN0