Skip to main content
Log in
Siemens 6AG1193-6BP00-7DA0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1193-6BP00-7DA0 SIPLUS ET 200SP BU, -40 to +70 °C

MPN6AG1193-6BP00-7DA0
Active

Siemens SIPLUS ET 200SP, BU15-P16+A0+2D base unit, 15 mm width, push-in terminals, conformal coating, -40 to +70 °C, 24 V DC, 10 A.

$52.07Ref. price · indicative, final on quote
Siemens 6AG1193-6BP00-7DA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1193-6BP00-7DA0 — Electrical
ParameterValue
Rated value (DC)24 V
6AG1193-6BP00-7DA0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)70 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1193-6BP00-7DA0 — Mechanical
ParameterValue
Width15 mm
Height117 mm
Depth35 mm
Weight (approx.)40 g

Product details

SIPLUS ruggedization for harsh environments

The 6AG1193-6BP00-7DA0: This is not a field-applied coating — the IPC-CC-830A Class A conformal coating is applied during PCB assembly, protecting against condensation, frost, commercially available coolants, lubricants, diesel, and oil droplets in the air. The unit also meets ANSI/ISA-71.04 Level GX Group A/B for corrosive gas environments and Level LC3 salt spray, making it suitable for process, oil & gas, and wastewater applications where standard ET 200SP hardware would degrade.

DIN-rail footprint and bus junction capacity

This BU type A0 base unit occupies a single slot (15 mm width × 117 mm height × 35 mm depth) on the DIN rail, accepting one ET 200SP I/O module with push-in terminals — no AUX terminals, no extra load group. External protection for the 24 V DC supply lines should be a 10 A miniature circuit breaker with type B or C tripping characteristic per the manufacturer's specification.

Frequently asked questions

What is the difference between 6AG1193-6BP00-7DA0 and 6ES7193-6BP00-0DA0?

The 6AG1193-6BP00-7DA0 is the SIPLUS ruggedized version of the standard 6ES7193-6BP00-0DA0.

Does 6AG1193-6BP00-7DA0 have push-in terminals?

Yes, the BU type A0 base unit is fitted with push-in terminals for field wiring. No AUX terminals are included on this variant.

Is 6AG1193-6BP00-7DA0 compatible with standard ET 200SP modules?

Yes, it accepts standard ET 200SP I/O modules in the same 15 mm-wide form factor. The SIPLUS coating does not affect mechanical or electrical compatibility with the backplane bus.

What is conformal coating and why is it used?

Conformal coating is a thin insulating layer applied to the PCB assembly to protect against moisture, condensation, corrosive gases, and particulate contamination. On this SIPLUS unit it is IPC-CC-830A Class A, applied at the factory, enabling reliable operation in condensing environments and atmospheres with industrial coolants, lubricants, and salt spray.

MPN
6AG1193-6BP00-7DA0