Skip to main content
Log in
Siemens 6AG1193-6BP20-2BF0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1193-6BP20-2BF0 SIPLUS ET 200SP Base Unit, 10 A

MPN6AG1193-6BP20-2BF0
Active

Siemens SIPLUS ET 200SP BU20-P8+A4+0B, 6AG1193-6BP20-2BF0, base unit with conformal coating, push-in terminals, 4 AUX terminals, 20 x 117 mm, rated 10 A at 60 °C.

Siemens 6AG1193-6BP20-2BF0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1193-6BP20-2BF0 — Electrical
ParameterValue
Rated value (DC)See manual
6AG1193-6BP20-2BF0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)70 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1193-6BP20-2BF0 — Mechanical
ParameterValue
Width20 mm
Height117 mm
Depth35 mm
Weight (approx.)48 g

Product details

SIPLUS coating for aggressive environments

The 6AG1193-6BP20-2BF0 is a SIPLUS ET 200SP base unit (BU type F0) built on the standard 6ES7193-6BP20-0BF0 with conformal coating applied. This coating protects the PCB assembly against condensation, corrosive gases, and conductive fouling — it passes conformal coating qualification and Type 1 protection against fouling. The unit is also resistant to commercially available coolants and lubricants, including diesel and oil droplets in the air, and meets Level GX Group A/B for harmful gas concentrations.

Thermal and current limits for panel planning

Rated 10 A continuous at up to 60 °C ambient — this is the current the power bus can carry to downstream modules. The operating temperature range depends on mounting orientation: -40 to +50 °C in vertical installation, -40 to +70 °C in horizontal installation. Derate altitude above 2000 m: at 5000 m the max ambient drops 20 K below the sea-level Tmax. The isolation test voltage is 3250 V DC for 1 minute (type test) and 2545 V DC for 2 seconds (routine test) between power bus, backplane bus, process terminals, and supply voltage.

Frequently asked questions

What is the difference between 6AG1193-6BP20-2BF0 and 6ES7193-6BP20-0BF0?

The 6AG1193-6BP20-2BF0 is the SIPLUS version of the standard 6ES7193-6BP20-0BF0 base unit. The key difference is the conformal coating on the SIPLUS variant, which provides protection against condensation, corrosive gases, coolants, and lubricants — making it suitable for harsh environments where the standard unit would not survive.

Is 6AG1193-6BP20-2BF0 compatible with all ET 200SP modules?

This is a BU type F0 base unit with push-in terminals and 4 AUX terminals, bridged to the left. It accepts standard ET 200SP I/O modules that fit the 20 mm wide form factor. The single-slot design means it supports one electronic module per base unit. Confirm module compatibility with the ET 200SP manual for your specific module type.

MPN
6AG1193-6BP20-2BF0