Siemens SIPLUS ET 200SP bus unit, conformal coated, -40 to +70 °C, push-in terminals, 24 V DC, 10 A, 15 mm wide, 141 mm high, 35 mm deep.
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Parameter | Value |
|---|---|
| Installation altitude, max. | 5 000 m |
| Operating temperature, min. (horizontal mounting) | -40 °C; = Tmin (incl. condensation/frost) |
| Operating temperature, max. (horizontal mounting) | 70 °C; = Tmax |
| Ambient temperature vs. altitude/pressure derating | Tmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m) |
| Parameter | Value |
|---|---|
| Width | 15 mm |
| Height | 141 mm |
| Depth | 35 mm |
| Weight (approx.) | 50 g |
| Parameter | Value |
|---|---|
| Number of slots | 1 |
| Up to 60 °C, max. | 10 A |
| Isolation tested with | 707 V DC |
| Between backplane bus and supply voltage | Yes |
| External protection for power supply lines | Yes; 24 V DC/10 A miniature circuit breaker with type B or C tripping characteristic |
| Protection against fouling acc. to EN 60664-3 | Yes; Type 1 protection |
| Resistant to commercially available coolants and lubricants | Yes; Incl. diesel and oil droplets in the air |
| Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04 | Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil) |
| Qualification and performance of electrical insulating compound for printed board assemblies according to IPC-CC-830A | Yes; Conformal coating, Class A |
This is the SIPLUS version of the standard ET 200SP bus unit 6ES7193-6BP20-0BA0, designated 6AG1193-6BP20-7BA0, with conformal coating and an extended temperature range of -40 °C to +70 °C. It's a BU type A0, equipped with push-in terminals, 10 auxiliary terminals bridged left, and occupies a single slot on the ET 200SP backplane.
At 15 mm wide, 141 mm high, and 35 mm deep, this bus unit fits into the standard ET 200SP mounting rail alongside active and passive modules.
Alternative models and sibling configurations in the same Siemens series. For obsolete or discontinued parts, these models can serve as compatible replacements or functional alternatives for plant maintenance.
No related articles