Skip to main content
Siemens 6AG1214-1AE30-2XB0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1214-1AE30-2XB0 SIPLUS CPU 1214C, -40 to 70°C

MPN6AG1214-1AE30-2XB0

Siemens SIPLUS CPU 1214C, order code 6AG1214-1AE30-2XB0, PROFINET interface, 24V DC with 20.4V-28.8V range, -40°C to 70°C, cULus/CE/UL, 2 MB integrated memory.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1214-1AE30-2XB0 — I/O
ParameterValue
Digital inputs14; Integrated; > +60 °C Number of simultaneously controllable inputs and outputs max. 50 %
Digital outputs10; > +60 °C Number of simultaneously controllable inputs and outputs max. 50%
ExpandableNo
Input data area1 024 byte
Output data area1 024 byte
6AG1214-1AE30-2XB0 — Processor & Memory
ParameterValue
Execution time, bit operations (typ.)0.1 µs; / Operation
Execution time, word operations (typ.)12 µs; / Operation
Execution time, floating-point arithmetic (typ.)18 µs; / Operation
Size, max.8 kbyte; Size of bit memory address area
6AG1214-1AE30-2XB0 — Electrical
ParameterValue
Rated value (DC)24 V
Permissible range, lower limit (DC)20.4 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)12 W
Short-circuit protectionNo; to be provided externally
6AG1214-1AE30-2XB0 — Environmental
ParameterValue
Temperature, min.-40 °C
Temperature, max.70 °C
Operating temperature, min. (horizontal mounting)-25 °C; = Tmin
Operating temperature, max. (horizontal mounting)70 °C; = Tmax; > +60 °C Number of simultaneously controllable inputs and outputs max. 50 %; no signal board can be used
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 080 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1214-1AE30-2XB0 — Mechanical
ParameterValue
Width110 mm
Height100 mm
Depth75 mm
Weight (approx.)415 g
6AG1214-1AE30-2XB0 — Communication
ParameterValue
Interface typePROFINET

Product details

The 6AG1214-1AE30-2XB0: Communication rides on PROFINET (TCP/IP enabled, no MODBUS and no PROFIBUS on board). Autocrossing and autonegotiation are standard, so you can plug directly into a switch without crossover cabling. The integrated 2 Mbyte load memory holds the program and data; backup time is 240 h typical for the retentive memory.

The 24 V supply holds regulation down to 20.4 V, which is useful in panels with long DC runs or shared power supplies that sag under load. If your installation sees transients or brownouts, this CPU stays online longer than a standard unit with a tighter tolerance. The -40 °C low end means the PLC can sit in unheated warehouses or outdoor cabinets during winter startups. At the high end, 70 °C covers enclosures with solar loading or heat from drives. Both limits are tested, not de-rated – the SIPLUS line is built for those extremes from day one.

Compliance paperwork you’ll need

cULus listing and UL approval cover North American panel certifications; CE mark satisfies European markets. No FM approval is on record, so avoid hazardous-area claims unless you have separate certification from the installation.

Frequently asked questions

What is the operating temperature range?

-40 °C to 70 °C.

Which fieldbus interfaces does it have?

PROFINET (TCP/IP). It does not support MODBUS or PROFIBUS.

Is this CPU expandable?

No, it is not expandable with additional signal modules.

What certifications are listed?

cULus, CE, and UL approval. No FM approval.

MPN
6AG1214-1AE30-2XB0