Skip to main content
Siemens 6AG1215-1BG31-5XB0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1215-1BG31-5XB0 S7-1200 CPU, -40 to 70°C

MPN6AG1215-1BG31-5XB0

Siemens S7-1200 CPU 1215C, 6AG1215-1BG31-5XB0, with conformal coating, -40 to 70 °C, 4 MB integrated memory, PROFINET interface.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1215-1BG31-5XB0 — I/O
ParameterValue
Digital inputs14; Integrated
Digital outputs10; Relays
Input data area1 024 byte
Output data area1 024 byte
6AG1215-1BG31-5XB0 — Processor & Memory
ParameterValue
Execution time, bit operations (typ.)0.085 µs; / instruction
Execution time, word operations (typ.)1.7 µs; / instruction
Execution time, floating-point arithmetic (typ.)2.5 µs; / instruction
Size, max.8 kbyte; Size of bit memory address area
6AG1215-1BG31-5XB0 — Programming
ParameterValue
Programming language: FBDYes
Programming language: LADYes
Programming language: SCLYes
6AG1215-1BG31-5XB0 — Electrical
ParameterValue
Rated value (DC)24 V
Current consumption (rated)100 mA at 120 V AC; 50 mA at 240 V AC
Power loss (typ.)12 W
Short-circuit protectionNo; to be provided externally
6AG1215-1BG31-5XB0 — Environmental
ParameterValue
Installation altitude, max.2 000 m
Temperature, min.-40 °C
Temperature, max.70 °C
Operating temperature, min. (horizontal mounting)-40 °C; = Tmin (incl. condensation/frost); start-up @ -25 °C
Operating temperature, max. (horizontal mounting)60 °C; = Tmax
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax - 20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m); above 2 000 m max. 132 V AC
6AG1215-1BG31-5XB0 — Mechanical
ParameterValue
Width130 mm
Height100 mm
Depth75 mm
Weight (approx.)550 g
6AG1215-1BG31-5XB0 — Communication
ParameterValue
Interface typePROFINET

Product details

What the extended temperature range means for your panel

The 6AG1215-1BG31-5XB0: If your panel sits in an unheated warehouse, a refrigerated area, or near a furnace line, this is the variant that keeps running when a standard S7-1200 would fault on cold-start or bake out. The conformal coating protects the board assembly against condensation and airborne contaminants. That matters in washdown zones, dairy processing, or any environment where humidity cycles past the dew point inside the enclosure.

Memory, backup, and program capacity

Integrated 4 Mbyte load memory gives room for the application code, with bit memory address area up to 8 kbyte. The typical backup time of 480 h holds the retentive data through a weekend power loss without the battery. The number of code blocks is limited only by the available RAM — no artificial block count ceiling. That matters when you're building a large state machine or recipe manager.

Fieldbus and I/O handling

Built-in PROFINET interface with autocrossing (auto MDI/MDI-X) for direct connection to a switch or a second CPU. The same port supports PROFINET IO as client or server, and can run TCP/IP, UDP, and MODBUS TCP simultaneously on the same physical connection. PROFIBUS DP is supported via an external CM module — the CPU itself does not carry a DP port, but the protocol stack is ready. AS-Interface also connects through a CM module. Process image: 1024 bytes inputs and 1024 bytes outputs. Forcing is supported for commissioning. The 2-wire sensor supply delivers 15 V DC at 2.5 mA for signal '1' and 5 V DC at 1 mA for signal '0'.

Programming and engineering

Programmable in LAD, FBD, and SCL — the full TIA Portal language set. The PID controller block is integrated, no separate function block purchase needed. The CPU supports variables covering inputs/outputs, memory bits, DBs, distributed I/Os, timers, and counters. PROFIsafe is not supported on this CPU — if you need safety over PROFINET, step to the F-CPU variant.

Physical fit and power supply

Dimensions: 130 mm wide, 100 mm high, 75 mm deep. The 120/230 V AC power supply is isolated — no external 24 V DC power module required for the CPU itself. The analog inputs accept 0 to +10 V or 0 to 20 mA, adjustable per channel. The shielded twisted-pair cable run is rated for up to 100 m.

This is the SIPLUS variant of the standard 6ES7215-1BG31-0XB0 CPU, with conformal coating and extended temperature range. No stock-holding claim; quoted per BOM quantity.

Frequently asked questions

What is the difference between 6AG1215-1BG31-5XB0 and 6ES7215-1BG31-0XB0?

The 6AG1215-1BG31-5XB0 is the SIPLUS variant of the standard 6ES7215-1BG31-0XB0 CPU. Functionally, both run the same firmware and support the same I/O configuration.

Can 6AG1215-1BG31-5XB0 replace 6ES7215-1BG31-0XB0?

Yes, the 6AG1215-1BG31-5XB0 is a drop-in functional replacement for the 6ES7215-1BG31-0XB0 in applications requiring the wider temperature range or conformal coating. The mounting dimensions, power supply, and PROFINET interface are identical. Confirm the project's ambient conditions before substituting.

MPN
6AG1215-1BG31-5XB0