Skip to main content
Siemens 6AG1221-3AD30-5XB0 — PLC I/O & Expansion Modules

Siemens 6AG1221-3AD30-5XB0 SIPLUS S7-1200 SB 1221, 4DI

MPN6AG1221-3AD30-5XB0
Active

Siemens SIPLUS S7-1200 SB 1221 signal board, 4 digital inputs 5 V DC 200 kHz, conformal coating, -40…+70 °C, 38 x 62 x 21 mm.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1221-3AD30-5XB0 — I/O
ParameterValue
Digital inputs4
6AG1221-3AD30-5XB0 — Electrical
ParameterValue
Current for signal "1" (typ.)15 mA
Max.70 °C
Power loss (typ.)1 W
6AG1221-3AD30-5XB0 — Environmental
ParameterValue
Min.-40 °C
6AG1221-3AD30-5XB0 — Mechanical
ParameterValue
Height62 mm
Width38 mm
Depth21 mm
6AG1221-3AD30-5XB0 — Other specifications
ParameterValue
Type of input voltageDC
Installation altitude above sea level, max.5 000 m
Protection against fouling acc. to EN 60664-3Yes; Type 1 protection
Ambient air temperature-barometric pressure-altitudeTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
Resistant to commercially available coolants and lubricantsYes; Incl. diesel and oil droplets in the air
Environmental conditions for process, measuring and control systems acc. to ANSI/ISA-71.04Yes; Level GX group A/B (excluding trichlorethylene; harmful gas concentrations up to the limits of EN 60721-3-3 class 3C4 permissible); level LC3 (salt spray) and level LB3 (oil)
Qualification and performance of electrical insulating compound for printed board assemblies according to IPC-CC-830AYes; Conformal coating, Class A

Product details

What the temperature range and coating mean for your panel

The 6AG1221-3AD30-5XB0: This is the SIPLUS variant of the standard 6ES7221-3AD30-0XB0, with conformal coating and a -40 to +70 °C operating range — the standard industrial module tops out at 60 °C and lacks the coating. The conformal coating (IPC-CC-830A Class A) and resistance to coolants, lubricants, diesel, and oil droplets mean it survives in lift stations, washdown zones, and anywhere H2S or salt spray is present — the standard module won't hold up in those conditions.

Four high-speed inputs — what they actually do

Four digital inputs at 5 V DC, each drawing 15 mA typical at signal '1', rated for 200 kHz counting — these are high-speed counter inputs, not general-purpose 24 V discrete inputs. At 200 kHz per channel, this board handles encoder feedback, flowmeter pulses, or fast proximity sensor edges that a standard 24 V input module would miss entirely. Typical power loss is 1 W — negligible thermal load in a sealed enclosure, but worth noting if you're packing multiple signal boards into a confined panel.

Altitude derating and environmental resilience

Rated for installation up to 5000 m above sea level, with a derating curve: full temperature range up to 2000 m, then -10 K at 2000-3500 m, and -20 K at 3500-5000 m — relevant for mining and high-altitude processing plants. Meets ANSI/ISA-71.04 GX level for corrosive gases (excluding trichlorethylene), plus salt spray and oil exposure — this is the module you spec for the wet well, not the one that lives in a climate-controlled control room. Protection against fouling per EN 60664-3 Type 1 — the conformal coating maintains creepage distances in polluted atmospheres.

Sourcing and fit for the S7-1200 rack

Fits the S7-1200 signal board slot (38 mm wide, 62 mm tall, 21 mm deep) — same footprint as the standard SB 1221, so it swaps in without panel rework. No pin-compatible second-source exists for this SIPLUS variant — the standard 6ES7221-3AD30-0XB0 is the base module but lacks the coating and extended temperature range.

Frequently asked questions

Does 6AG1221-3AD30-5XB0 have conformal coating?

Yes — conformal coating per IPC-CC-830A Class A, plus resistance to coolants, lubricants, diesel, oil droplets, salt spray, and corrosive gases per ANSI/ISA-71.04 GX.

MPN
6AG1221-3AD30-5XB0