Skip to main content
Log in
Siemens 6AG1222-1AD30-5XB0 — PLC I/O & Expansion Modules

6AG1222-1AD30-5XB0 SIPLUS S7-1200 SB, -40 to +70°C

MPN6AG1222-1AD30-5XB0
Active

Siemens SIPLUS S7-1200 SB 1222 I/O module, 6AG1222-1AD30-5XB0, 2 DI/2 DQ, 5 V DC, -40…+70 °C, conformal coating.

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6AG1222-1AD30-5XB0 — I/O
ParameterValue
Digital outputs4
6AG1222-1AD30-5XB0 — Electrical
ParameterValue
Rated value (DC)5 V
Max.70 °C
Power loss (typ.)0.5 W
Short-circuit protectionNo
Max. cable length, shielded50 m
6AG1222-1AD30-5XB0 — Performance
ParameterValue
Diagnostics functionYes
6AG1222-1AD30-5XB0 — Environmental
ParameterValue
Min.-40 °C
6AG1222-1AD30-5XB0 — Mechanical
ParameterValue
Height62 mm
Width38 mm
Depth21 mm
Weight (approx.)40 g

Product details

The 6AG1222-1AD30-5XB0 is a SIPLUS S7-1200 SB 1222 signal board that provides 2 digital inputs and 2 digital outputs at 5 V DC, switching at up to 200 kHz. The 4 mA per-channel supply keeps power draw low — 0.5 W typical from the backplane.

Outputs are 0.1 A resistive max, supplied by backplane at 4 mA per channel. Module has Type 1 fouling protection and conformal coating Class A. Resistant to coolants and lubricants.

Integration note

Module is 38 mm wide, 62 mm high, 21 mm deep. Mounts as a single slot on the S7-1200 left-side expansion bus. Powered from backplane 5 V DC at 50 mA typical, it has 2 digital inputs and 2 digital outputs at 5 V DC 200 kHz.

MPN
6AG1222-1AD30-5XB0