BOM / RFQ

Siemens 6AG1222-1BH30-2XB0 — Digital Output Modules

Siemens 6AG1222-1BH30-2XB0 SIPLUS DO 16×24VDC/0.5A

MPN6AG1222-1BH30-2XB0

Siemens 6AG1222-1BH30-2XB0 SIPLUS digital output module, 16×24 V DC/0.5 A, -40 to 70 °C, 45 mm width, IP20.

Add to RFQ

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6AG1222-1BH30-2XB0 — Outputs
Parameter	Value
Digital outputs	16

6AG1222-1BH30-2XB0 — Electrical
Parameter	Value
Rated value (DC)	24 V
Output current, resistive load, max.	0.5 A
Output current at signal "1" (rated)	0.5 A
Permissible range, upper limit (DC)	28.8 V
Permissible range, lower limit (DC)	20.4 V
Output voltage at signal "1" (min.)	20 V DC
Residual current at signal "0", max.	10 µA
Current consumption from backplane bus (5 V DC), max.	140 mA
Power dissipation (typ.)	2.5 W
Inductive shutdown voltage clamp	typ. (L+) -48 V
Isolation between channels and backplane bus	500 V AC
Isolation, channels in groups of	1

6AG1222-1BH30-2XB0 — Protection & Diagnostics
Parameter	Value
Short-circuit protection	No; to be provided externally
Diagnostics function	Yes
Diagnostic alarm	Yes

6AG1222-1BH30-2XB0 — Performance
Parameter	Value
Output switching delay 0 to 1, max.	50 µs
Output switching delay 1 to 0, max.	200 µs
Switching frequency, inductive load, max.	0.5 A
Switching frequency, lamp load, max.	5 W

6AG1222-1BH30-2XB0 — Mechanical & Connection
Parameter	Value
Cable length, unshielded, max.	150 m
Cable length, shielded, max.	500 m
Width	45 mm
Height	100 mm
Depth	75 mm
Weight (approx.)	220 g

Product details

The 6AG1222-1BH30-2XB0: Sixteen-channel digital output module for the S7-1200 system, in the SIPLUS extended-temperature variant. Each channel switches 0.5 A resistive or inductive loads at 24 V DC nominal (20.4–28.8 V permissible). Backplane bus draws 140 mA at 5 V DC; total power consumption is 2.5 W typical. On-board diagnostics and alarm reporting — no external wiring needed for channel status.