Skip to main content
Log in
Siemens 6AG1322-1BF01-2XB0 — Digital Output Modules

Siemens 6AG1322-1BF01-2XB0 Digital Output Module, 8 DO, 24V

MPN6AG1322-1BF01-2XB0

Siemens SIMATIC S7-1200 digital output module, 8 outputs, 24 V DC, 4 A, -40 to 70 °C, UL File E239877

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6AG1322-1BF01-2XB0 — Outputs
ParameterValue
Digital outputs8
6AG1322-1BF01-2XB0 — Electrical
ParameterValue
Rated value (DC)24 V
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)2 A
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)20.4 V
Output voltage at signal "1" (min.)L+ (-0.8 V)
Residual current at signal "0", max.0.5 mA
Output current up to 60 °C, max.4 A
Current consumption from backplane bus (5 V DC), max.40 mA
Power dissipation (typ.)6.8 W
Inductive shutdown voltage clampL+ (-48 V)
Load resistance, upper limit4 kΩ
Load resistance, lower limit12 Ω
Isolation between channelsYes
Isolation between channels and backplane busYes; Optocoupler
Isolation, channels in groups of4
Isolation test voltage500 V DC
6AG1322-1BF01-2XB0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes; Electronic
Diagnostics functionNo
Diagnostic alarmNo
Short-circuit response threshold (typ.)3 A
Short-circuit detectionNo
Wire-break detectionNo
Redundant load controlYes
Output can drive a digital inputYes
6AG1322-1BF01-2XB0 — Performance
ParameterValue
Output switching delay 0 to 1, max.100 µs
Output switching delay 1 to 0, max.500 µs
Switching frequency, inductive load, max.0.5 Hz
Switching frequency, lamp load, max.10 Hz
6AG1322-1BF01-2XB0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width40 mm
Height125 mm
Depth120 mm
Weight (approx.)190 g

Product details

Current-production digital output slice

The Siemens 6AG1322-1BF01-2XB0 is an 8-output digital output module rated 4 A per channel continuous at 24 V DC from -40 to 70 °C. Electronic short-circuit protection eliminates fuse swaps. Switching speed is modest — 100 µs on-to-off, 500 µs off-to-on — so it's for lamp loads up to 10 Hz or inductive loads at 0.5 Hz, not for high-speed stepping. No diagnostic or wire-break feedback, so the PLC handles fault logic via the load circuit monitoring.

Sourcing posture

CE marked and UL approved under File E239877, so it clears machine-build compliance in North America and Europe without extra paperwork.

Frequently asked questions

What is the operating temperature range?

The module operates from -40 °C to 70 °C with no derating on the 4 A output current.

What compliance certifications does it hold?

It carries CE marking and UL approval under File E239877.

MPN
6AG1322-1BF01-2XB0