BOM / RFQ

Siemens 6AG1322-8BH10-7AB0 — Digital Output Modules

Siemens 6AG1322-8BH10-7AB0 SIPLUS DO Module, 16ch, 70°C

Name: 6AG1322-8BH10-7AB0
Brand: Siemens
SKU: 6AG1322-8BH10-7AB0
Availability: LimitedAvailability
Author: Contract-Build Bao

MPN6AG1322-8BH10-7AB0

Siemens SIPLUS S7-1500 digital output module, 16 channels, 24 V DC, 0.5 A per channel, -25 to 70 °C, diagnostics, wire-break and short-circuit protection.

Add to RFQ

Siemens 6AG1322-8BH10-7AB0 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6AG1322-8BH10-7AB0 — Outputs
Parameter	Value
Digital outputs	16

6AG1322-8BH10-7AB0 — Electrical
Parameter	Value
Rated value (DC)	24 V
Output current, resistive load, max.	100 Hz
Output current at signal "1" (rated)	0.5 A
Output current, max. per circuit / per module	0.6 A
Permissible range, upper limit (DC)	28.8 V
Permissible range, lower limit (DC)	20.4 V
Output voltage at signal "1" (min.)	L+ (-0.7 V)
Residual current at signal "0", max.	0.7 mA
Output current up to 60 °C, max.	2 A
Current consumption from backplane bus (5 V DC), max.	80 mA
Power dissipation (typ.)	5.7 W
Inductive shutdown voltage clamp	L+ (-68 V)
Load resistance, upper limit	4 kΩ
Load resistance, lower limit	48 Ω
Isolation between channels	No
Isolation between channels and backplane bus	Yes
Isolation, channels in groups of	4
Isolation test voltage	500 V DC

6AG1322-8BH10-7AB0 — Protection & Diagnostics
Parameter	Value
Short-circuit protection	Yes
Diagnostics function	Yes
Diagnostic alarm	Yes
Short-circuit response threshold (typ.)	1.4 A; per channel
Short-circuit detection	Yes
Wire-break detection	Yes
Redundant load control	Yes

6AG1322-8BH10-7AB0 — Performance
Parameter	Value
Output switching delay 0 to 1, max.	3 ms
Output switching delay 1 to 0, max.	3 ms
Switching frequency, lamp load, max.	10 Hz

6AG1322-8BH10-7AB0 — Mechanical & Connection
Parameter	Value
Cable length, unshielded, max.	600 m
Cable length, shielded, max.	1 000 m
Width	40 mm
Height	125 mm
Depth	120 mm
Weight (approx.)	350 g

Product details

Comparison with standard variant

The 6AG1322-8BH10-7AB0: The standard 6ES7522-1BH01-0AB0 shares the same 16 DO footprint and basic diagnostics but is rated for the standard 0–60 °C range and lacks the UL/ATEX/FM markings at 60 °C. For panels requiring 70 °C ambient or hazardous location certification, this SIPLUS variant is the approved alternate. Electrical characteristics otherwise match; no rewiring needed when swapping within a panel that already uses the standard module but requires ambient-temperature headroom.

Integration and physical mounting

Mounts on the S7-1500 DIN rail, 40 mm wide, requires a 40-pin front connector (not included). Diagnostic data is readable via the backplane; wire-break and short-circuit alarms are group and per-channel respectively. Response time 3 ms per transition. Derating applies above 60 °C: at 70 °C per-channel current drops to 0.5 A. Between-channel isolation is not provided — common load groups must be managed at the wiring level.