The Siemens 6AG1332-1SH71-7AA0 is a 2.5 A rated DC power supply from the SITOP family. If you're sorting a pallet of industrial gear, this one's a straight-up workhorse for standard DC bus applications—83% efficient, and it'll run on 120 or 230 VAC without a second thought. Input accepts 85–132 VAC or 176–264 VAC at 47–63 Hz, with automatic range selection. Output is a controlled, isolated DC voltage rated continuously at 2.5 A. Mounting is quick: snap onto DIN rail EN 60715 35x7.5/15 or wall mount. Clearance is tight—20 mm top and bottom for airflow, 0 mm left and right—so it fits flush in a crowded panel. IP20 protected, CE marked, and compliant with EN 55022 Class B emissions plus EN 61000-6-2 immunity—keeps noise out of sensitive controls.
Siemens 6AG1332-1SH71-7AA0 Power Supply, 2.5 A, 83% Eff, IP2
MPN6AG1332-1SH71-7AA0
Active
Siemens SITOP series, 6AG1332-1SH71-7AA0, 2.5 A DC output, 83% efficiency, IP20, 70×100×75 mm.
$134.62 – $364.96Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Fuse protection type | T 3,15 A/250 V (not accessible) |
| Type of electrical connection | screw-type terminals |
| Type of the power supply network | 1-phase AC |
| Voltage curve at output | Controlled, isolated DC voltage |
| At rated input voltage 120 | 1.2 A |
| At rated input voltage 230 | 0.67 A |
| Output voltage at DC rated value | 24 V |
| On slow fluctuation of input voltage | 0.1 % |
| Relative overall tolerance of the voltage | 3 % |
| Product function output voltage adjustable | No |
| Behavior of the output voltage when switching on | No overshoot of Vout (soft start) |
| At rated output voltage for rated value of the output current typical | 12 W |
All specifications+62 ▾
| Parameter | Value |
|---|---|
| Relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.3 % |
| At Short-Circuit during operation | 100 ms |
| Design of Short-Circuit protection | Constant current characteristic |
| On Short-Circuiting during the Start-Up | 100 ms |
| At Short-Circuit during operation typical | 6 A |
| Property of the output Short-Circuit proof | Yes |
| On Short-Circuiting during the Start-Up typical | 6 A |
| Current limitation of inrush current at 25 °C maximum | 13 A |
| Buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| Supplied active power typical | 60 W |
| Number of Parallel-Switched equipment resources for increasing the power | 2 |
| Line frequency | 47 ... 63 Hz |
| Depth of the enclosure | 75 mm |
| Width of the enclosure | 70 mm |
| Height of the enclosure | 100 mm |
| Product feature of the enclosure housing can be lined up | Yes |
| In horizontal mounting position during operation | -25 ... +70 °C; with natural convection |
| Installation altitude at height above sea level maximum | 6 000 m |
| Ambient condition relating to ambient temperature - air pressure - installation altitude | In case of operation at altitudes of 2000 - 6000 m above sea level: Output power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5 K/1000 m |
| MTBF at 40 °C | 1 492 537 h |
| CE marking | Yes |
| Top | 20 mm |
| Left | 0 mm |
| Right | 0 mm |
| Bottom | 20 mm |
| 1 at AC | 85 ... 132 V |
| 2 at AC | 176 ... 264 V |
| Typical | 2.7 A |
| At input | L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² |
| At output | L+, M: 2 screw terminals each for 0.5 ... 2.5 mm² |
| Rated range | 0 ... 2.5 A |
| Rated value | 2.5 A |
| 1 rated value | 50 Hz |
| 2 rated value | 60 Hz |
| In the feeder | Recommended miniature circuit breaker: 16 A characteristic B or 10 A characteristic C |
| Initial value | Automatic range selection |
| Mounting | Snaps onto DIN rail EN 60715 35x7.5/15, wall mounting |
| I2t value maximum | 0.5 A²·s |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| Galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| 1 at AC rated value | 120 V |
| 2 at AC rated value | 230 V |
| Protection class IP | IP20 |
| Bridging of equipment | Yes |
| Efficiency in percent | 83 % |
| Response delay maximum | 6 s; 2 s at 230 V, 6 s at 120 V |
| For emitted interference | EN 55022 Class B |
| For interference immunity | EN 61000-6-2 |
| During storage and transport | -40 ... +85 °C |
| Load step 100 to 50% typical | 5 ms |
| Load step 50 to 100% typical | 5 ms |
| At output 1 at DC rated value | 24 V |
| Overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| Design of input wide range input | No |
| On slow fluctuation of ohm loading | 0.2 % |
| Operating resource protection class | Class I |
| Design of the overvoltage protection | < 33 V |
| Display version for normal operation | Green LED for 24 V OK |
| Operating condition of the mains buffering | at Vin = 93/187 V |
| Galvanic isolation between input and output | Yes |
| Chemical resistance to commercially available cooling lubricants | Yes; incl. diesel and oil droplets in the air |
| Product conformity of the coating qualification and performance of electrical insulating compound for printed board assemblies according to IPC-CC-830A | Yes; Conformal Coating, Class A |
Product details
Frequently asked questions
What are the clearance requirements for mounting this power supply?
Top and bottom both need 20 mm clearance for airflow; left and right can be 0 mm, allowing flush side-by-side mounting.
What input voltages does it accept?
It accepts two AC ranges: 85–132 VAC and 176–264 VAC, 47–63 Hz, with automatic selection.
What compliance certifications does it carry?
CE marking, IP20 protection class, EN 55022 Class B for conducted emissions, and EN 61000-6-2 for immunity.
MPN
6AG1332-1SH71-7AA0