Skip to main content
Log in
Siemens 6AG1332-4BA00-7AA0 — PLC I/O & Expansion Modules

Siemens 6AG1332-4BA00-7AA0 SITOP Power Supply, 3 A, 24 V DC

MPN6AG1332-4BA00-7AA0
Active

Siemens SITOP PSU8200 6AG1332-4BA00-7AA0, 3 A industrial power supply, 24 V DC, 50x147x129 mm, IP20, 87% efficiency.

$320.04Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6AG1332-4BA00-7AA0 key specifications
ParameterValue
Fuse protection typeT 3,15 A/250 V (not accessible)
Type of electrical connectionScrew-/spring clamp connection
Type of the power supply network1-phase AC
Voltage curve at outputControlled, isolated DC voltage
At rated input voltage 1201.4 A
At rated input voltage 2300.8 A
Output voltage at DC rated value24 V
On slow fluctuation of input voltage0.1 %
Relative overall tolerance of the voltage1 %
Product function output voltage adjustableNo
Behavior of the output voltage when switching onNo overshoot of Vout (soft start)
At rated output voltage for rated value of the output current typical11 W

All specifications

6AG1332-4BA00-7AA0 additional specifications
ParameterValue
Relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical0.1 %
At Short-Circuit during operation70 ms
Response value current limitation3.15 ... 3.6 A
Design of Short-Circuit protectionElectronic shutdown, automatic restart
On Short-Circuiting during the Start-Up70 ms
At Short-Circuit during operation typical12 A
Property of the output Short-Circuit proofYes
On Short-Circuiting during the Start-Up typical12 A
Current limitation of inrush current at 25 °C maximum23 A
Buffering time for rated value of the output current in the event of power failure minimum20 ms
Supplied active power typical72 W
Number of Parallel-Switched equipment resources for increasing the power2
Line frequency45 ... 65 Hz
Depth of the enclosure129 mm
Width of the enclosure50 mm
Height of the enclosure147 mm
Product feature of the enclosure housing can be lined upYes
In horizontal mounting position during operation-40 ... +70 °C; with natural convection
Installation altitude at height above sea level maximum6 000 m
Ambient condition relating to ambient temperature - air pressure - installation altitudeIn case of operation at altitudes of 2000 - 6000 m above sea level: Output power derating of -7.5 %/1000 m or reduction of the ambient temperature by 5 K/1000 m
Removable terminal at inputYes
Removable terminal at outputYes
MTBF at 40 °C1 611 993 h
CE markingYes
Top40 mm
Left0 mm
Right0 mm
Bottom40 mm
1 at AC85 ... 132 V
2 at AC170 ... 264 V
Typical0.4 mA
At inputL, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm²
At outputL+, M: 2 spring-loaded terminals each for 0.5 to 2.5 mm²
Rated range0 ... 3 A
Rated value3 A
1 rated value50 Hz
2 rated value60 Hz
In the feederRecommended miniature circuit breaker: 10 A characteristic B or 6 A characteristic C
Initial valueAutomatic range selection
MountingCan be mounted onto S7-1500 rail
I2t value maximum1.3 A²·s
Other informationSpecifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified)
Galvanic isolationSafety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 and EN 61131-2
1 at AC rated value120 V
2 at AC rated value230 V
Protection class IPIP20
Bridging of equipmentYes
Efficiency in percent87 %
Response delay maximum1.5 s
For emitted interferenceEN 55022 Class B
For interference immunityEN 61000-6-2
Load step 10 to 90% typical5 ms
Load step 90 to 10% typical5 ms
During storage and transport-40 ... +85 °C
At output 1 at DC rated value24 V
For mains harmonics limitationEN 61000-3-2
Overvoltage overload capability2.3 × Vin rated, 1.3 ms
Design of input wide range inputNo
On slow fluctuation of ohm loading0.1 %
Operating resource protection classClass I
Design of the overvoltage protectionAdditional control loop, limitation (closed loop control) at < 28.8 V
Display version for normal operationLED green for 24 V OK; LED red for error; LED yellow for stand-by
Operating condition of the mains bufferingat Vin = 93/187 V
Galvanic isolation between input and outputYes
Chemical resistance to commercially available cooling lubricantsYes; incl. diesel and oil droplets in the air
Product conformity of the coating qualification and performance of electrical insulating compound for printed board assemblies according to IPC-CC-830AYes; Conformal Coating, Class A

Product details

The Siemens 6AG1332-4BA00-7AA0 SITOP power supply delivers a rated 3 A at 24 V DC output from a wide-ranging AC input (85–132 V and 170–264 V at 50/60 Hz). It mounts directly onto the S7-1500 rail, fitting into a 50 mm wide enclosure with dimensions 147 x 129 mm (H x D). Input connections are single screw terminals for L, N, and PE (0.5–2.5 mm²); the output side uses two spring-loaded terminals per pole (L+, M) for fast wiring—no tool needed for the power distribution.

The controlled, isolated DC output carries a 1.3 A²·s I²t maximum and a 1.5 s response delay—the latter governs inrush behaviour when powering capacitive loads or driving downstream DC buses. EMC performance meets EN 55022 Class B for conducted and radiated emission and EN 61000-6-2 for industrial immunity—no external filtering needed in most standard control environments. The CE marking confirms compliance with the applicable directives.

Frequently asked questions

What compliance documents are available for this part?

The supply carries CE marking and meets EN 55022 Class B for emissions, EN 61000-6-2 for immunity, and EN 60950-1/EN 50178/EN 61131-2 for safety (SELV output).

What are the physical dimensions and mounting requirements?

The enclosure measures 50 mm wide, 147 mm high, and 129 mm deep. It fastens directly onto an S7-1500 rail, with IP20 protection.

MPN
6AG1332-4BA00-7AA0