Skip to main content
Log in
Siemens 6AG1332-5HD01-7AB0 — Analog Output Modules

Siemens 6AG1332-5HD01-7AB0 SIPLUS AO Module, 4 AO, -40 to 70

MPN6AG1332-5HD01-7AB0

Siemens SIPLUS 6AG1332-5HD01-7AB0, 4-channel analog output module, -40 to 70°C, 24 V DC, 20-pin front connector.

$810.26Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6AG1332-5HD01-7AB0 — Outputs
ParameterValue
Number of analog outputs4
Output range: -10 V to +10 VYes
Output range: 0 to 10 VYes
Output range: 1 V to 5 VYes
Output range: 0 to 20 mAYes
Output range: 4 to 20 mAYes
Output range: -20 mA to +20 mAYes
Load resistance, current outputs, max.500 Ω
Load resistance, voltage outputs, min.1 kΩ
Current output, no-load voltage, max.18 V
Voltage output, short-circuit current, max.25 mA
Voltage output, short-circuit protectionYes
Inductive load, current outputs, max.10 mH
Capacitive load, voltage outputs, max.1 µF
Cable length, shielded, max.200 m
6AG1332-5HD01-7AB0 — Performance
ParameterValue
Resolution (incl. sign, with overrange), max.12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 mA to 20 mA: 12 bit
Error, voltage output (rel. to output range)0.4 %
Error, current output (rel. to output range)0.5 %
Conversion time (per channel)0.8 ms
Settling time, resistive load0.2 ms
Settling time, inductive load0.5 ms; 0.5 ms (1 mH); 3.3 ms (10 mH)
Settling time, capacitive load3.3 ms
6AG1332-5HD01-7AB0 — Power
ParameterValue
Rated value (DC)24 V
Power loss (typ.)3 W
Current consumption from backplane bus (5 V DC), max.60 mA
Current consumption from load voltage L+ (no load), max.240 mA
Reverse polarity protectionYes
6AG1332-5HD01-7AB0 — Diagnostics
ParameterValue
Diagnostics functionYes; Parameterizable
Diagnostic interrupt/alarmYes; Parameterizable
6AG1332-5HD01-7AB0 — Isolation
ParameterValue
Isolation: channels to backplane busYes
Isolation: between channelsNo
Isolation: channels to load voltage L+Yes
Isolation test voltage500 V DC
6AG1332-5HD01-7AB0 — Environmental
ParameterValue
Temperature, max.70 °C
Temperature, min.-40 °C
Installation altitude, max.5 000 m
6AG1332-5HD01-7AB0 — Mechanical
ParameterValue
Front connector required20-pin
Width40 mm
Height125 mm
Depth120 mm

Product details

The Siemens SIPLUS 6AG1332-5HD01-7AB0 is a 4-channel analog output module for the S7-300 family, built for extended ambient conditions from -40 °C to 70 °C. It outputs voltage (0 to 10 V, 1 to 5 V, -10 V to +10 V) or current (0 to 20 mA, 4 to 20 mA, -20 mA to +20 mA) signals per channel, with a conversion time of 0.8 ms per channel. Rated for 24 V DC supply. Maximum load with current outputs is 500 Ω; with voltage outputs, minimum load is 1 kΩ. The module draws 60 mA max from the backplane bus at 5 V DC and dissipates 3 W typical.

Width 40 mm, depth 120 mm, height 125 mm — fits standard S7-300 DIN rail slots. Requires a 20-pin front connector. Shielded cable runs up to 200 m. Isolation tested at 500 V DC. Reverse polarity protection on the supply is built in. No channel-to-channel isolation — ground all field wiring at a common reference.

Diagnostics and lifecycle

Compliance includes CE mark, UL approval file E239877, KC approval, EAC (formerly Gost-R), and RCM (formerly C-TICK).

Frequently asked questions

What is the operating temperature range of 6AG1332-5HD01-7AB0?

The module is rated for operation from -40 °C up to 70 °C. This enables use in unheated enclosures or outdoor process skids where standard S7-300 modules would not be specified.

What compliance documentation is available for this module?

The module carries UL approval (File E239877), CE mark, KC approval, EAC, and RCM certification.

MPN
6AG1332-5HD01-7AB0