The Siemens 6AG1332-8TF01-2AB0 SIPLUS analog output module delivers 8 current outputs (0/4–20 mA) with 16-bit resolution and a diagnostic alarm, rated for -40 to 70 °C ambient. Each channel drives up to 750 Ω loop resistance and supports inductive loads up to 10 mH; reverse polarity protection is built in, and isolation between channels and backplane is tested at 500 V DC. Requires a 20-pin front connector; diagnostic LED (red SF) signals group errors, readable via the backplane bus.
Compliance documentation includes CE, UL (File E239877), KC, EAC (formerly GOST-R), and RCM (formerly C-TICK) — approvals cover most global panel markets without extra certification steps.
Mounts on DIN rail; dimensions 40 x 125 x 117 mm (W x H x D). Draws 6 W typical — 110 mA from the 5 V backplane bus and up to 350 mA from the load voltage L+. Shielded cable runs up to 800 m. No isolation between channels, so common-mode potential on field loops stays within the listed max. Terminal voltage on current outputs reaches 24 V open-circuit.