Skip to main content
Log in
Siemens 6AG1518-4AP00-4AB0 — PLCs (Programmable Logic Controllers)

Siemens 6AG1518-4AP00-4AB0 SIPLUS S7-1500, -40..70°C

MPN6AG1518-4AP00-4AB0
NRND

Siemens 6AG1518-4AP00-4AB0 SIPLUS S7-1500 CPU, -40 to 70 °C, MRP redundancy manager, 32 kB process image.

Siemens 6AG1518-4AP00-4AB0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026

Specifications

6AG1518-4AP00-4AB0 — Processor & Memory
ParameterValue
Execution time, bit operations (typ.)1 ns
Execution time, word operations (typ.)2 ns
Execution time, floating-point arithmetic (typ.)6 ns
Size, max.16 kbyte
6AG1518-4AP00-4AB0 — I/O
ParameterValue
Input data area32 kbyte; All inputs are in the process image
Output data area32 kbyte; All outputs are in the process image
6AG1518-4AP00-4AB0 — Programming
ParameterValue
Programming language: FBDYes
Programming language: LADYes
Programming language: SCLYes
6AG1518-4AP00-4AB0 — Electrical
ParameterValue
Rated value (DC)24 V
Current consumption (rated)1.55 A
Permissible range, lower limit (DC)19.2 V
Permissible range, upper limit (DC)28.8 V
Power loss (typ.)24 W
6AG1518-4AP00-4AB0 — Environmental
ParameterValue
Installation altitude, max.5 000 m
Temperature, min.-40 °C
Temperature, max.70 °C
Operating temperature, min. (horizontal mounting)0 °C; = Tmin (incl. condensation/frost)
Operating temperature, max. (horizontal mounting)60 °C; Display: 50 °C, at an operating temperature of typically 50 °C, the display is switched off
Ambient temperature vs. altitude/pressure deratingTmin ... Tmax at 1 140 hPa ... 795 hPa (-1 000 m ... +2 000 m) // Tmin ... (Tmax - 10 K) at 795 hPa ... 658 hPa (+2 000 m ... +3 500 m) // Tmin ... (Tmax -20 K) at 658 hPa ... 540 hPa (+3 500 m ... +5 000 m)
6AG1518-4AP00-4AB0 — Mechanical
ParameterValue
Width175 mm
Height147 mm
Depth129 mm
Weight (approx.)1 988 g

Product details

It runs as an MRP redundancy manager on rings up to 50 nodes and supports IRT for isochronous motion control. Process image holds 32 kbyte each for inputs and outputs, and you can plug up to 8 communication modules (PROFIBUS, PROFINET, Ethernet) into the rack. This CPU does not bring PROFIsafe onboard; safety functions need a separate F-CPU.

Frequently asked questions

What does DCP mean on this CPU?

DCP stands for Discovery and Configuration Protocol. It's supported, so the CPU can automatically detect and assign device names and IP addresses over Ethernet without needing a separate bootstrapping tool.

Does it support FBD programming?

Yes, Function Block Diagram (FBD) is one of the supported programming languages, along with LAD, STL, SCL, and GRAPH.

MPN
6AG1518-4AP00-4AB0