The Siemens 6AG1522-5HF00-2AB0 is a SIPLUS S7-1500 digital output module with 8 relay outputs, each rated for a signal '1' of 5 A at 24 VDC. Rated supply voltage 24 VDC, typical power loss 3 W. MSO support is enabled (Yes) for time-synchronous line applications – the module can participate in clocked I/O updates alongside other MSO-capable S7-1500 modules. Depth of 129 mm matches the standard S7-1500 mounting depth, so it fits existing panel layouts without clearance changes.
Compared to the standard S7-1500 variant 6ES7522-5HF00-0AB0
The SIPLUS variant 6AG1522-5HF00-2AB0 shares the same electrical specification and pinout as the standard 6ES7522-5HF00-0AB0 – same 8 relay outputs, same 5 A rating, same 24 V supply, same MSO capability, same depth and width. The difference lies in environmental resilience: SIPLUS modules are built for extended temperature ranges, humidity, and corrosive atmospheres, typically with conformal coating. For a panel builder or MRO planner, this means the SIPLUS version is a drop-in replacement for the standard module when the ambient conditions exceed the standard range; there is no wiring or addressing change. If the environment is already controlled (e.g. IP54 cabinet with HVAC), the standard module may suffice. For new designs in harsh plants, specify the SIPLUS variant at the start.
Mounting: 35 mm wide, snap-on DIN rail; depth 129 mm. Channel isolation tested at 2 500 V DC; no internal short-circuit protection (fuse each group per manual; max 8 A per group, 64 A per module). Diagnostic alarm and module diagnostics supported; wire-break diagnostics not available.