Siemens 6DL1131-6TD00-0HX1
MPN6DL1131-6TD00-0HX1
Active
SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnostics
$186.69Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
I/O
| Parameter | Value |
|---|---|
| Digital inputs | 4; NAMUR |
Electrical
| Parameter | Value |
|---|---|
| Rated value (DC) | 8.2 V |
| For signal "1" | typ. 8 mA |
| For signal "0" | Max. 1.2 mA |
| Power loss (typ.) | 1.2 W |
| Short-circuit protection | Yes |
| Isolation test voltage | further information on insulation can be found in the "ET 200SP HA / ET 200SP modules for devices in hazardous areas” System Manual |
| Isolation: between channels | No |
| Isolation: channels to backplane bus | Yes |
| Max. cable length, shielded | 500 m; Ex characteristic values must be observed; without shield applied on both sides and cable lengths of more than 200 m, measured value distortions can occur when using the inputs as counter/ frequency meter |
| Max. cable length, unshielded | 300 m; Ex characteristic values must be observed; without shield applied on both sides and cable lengths of more than 200 m, measured value distortions can occur when using the inputs as counter/ frequency meter |
Performance
| Parameter | Value |
|---|---|
| Parameterizable | Yes |
| Diagnostic alarm | Yes |
| Diagnostics function | Yes |
Mechanical
| Parameter | Value |
|---|---|
| Height | 73 mm |
| Width | 20 mm |
| Depth | 58 mm |
| Weight (approx.) | 55 g |
Specifications
| Parameter | Value |
|---|---|
| Horizontal Installation, Max. | 70 °C |
MPN
6DL1131-6TD00-0HX1