Siemens 6DL1134-6JD00-0HX1
MPN6DL1134-6JD00-0HX1
Active
SIMATIC ET 200SP HA, ET 200SP, analog ex-i input module, Ex-AI 4xTC/2xRTD 2-/3-/4-wire, suitable for BaseUnit type X1, channel diagnostics, 16bit, +/-0.05%
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Power loss (typ.) | 0.8 W |
| Isolation test voltage | further information on insulation can be found in the "ET 200SP HA / ET 200SP modules for devices in hazardous areas” System Manual |
| Isolation: between channels | No |
| Isolation: channels to backplane bus | Yes |
| Max. cable length, shielded | 200 m; Ex characteristic values must be observed; line resistance at RTD (simple) max. 25 ohm; loop resistance at TC max. 8 kOhm |
| Parameter | Value |
|---|---|
| Resolution incl. overrange (bit, with sign), max. | 16 bit |
| Parameterizable | Yes; none, weak, medium, strong, channel-by-channel |
| Diagnostic alarm | Yes |
| Diagnostics function | Yes |
| Parameter | Value |
|---|---|
| Height | 73 mm |
| Width | 20 mm |
| Depth | 58 mm |
| Weight (approx.) | 55 g |
| Parameter | Value |
|---|---|
| Horizontal Installation, Max. | 70 °C |
MPN
6DL1134-6JD00-0HX1