Siemens 6DL1134-6TH00-0PH1
MPN6DL1134-6TH00-0PH1
Active
SIMATIC ET 200SP HA, analog HART input module, AI 16XI 2-wire HART HA, suitable for terminal block H1, M1, color code CC01, channel diagnostics, 16-bit, +/-0.1%,
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Analog inputs | 16 |
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Power loss (typ.) | 4.5 W; without sensor supply |
| Short-circuit protection | Yes; Electronic (response threshold 0.7 A to 1.5 A) |
| Reverse polarity protection | Yes |
| Isolation test voltage | 1 500 V DC/1 min, type test |
| Isolation: between channels | No |
| Isolation: channels to backplane bus | Yes |
| Max. cable length, shielded | 800 m; with unshielded cables up to 800 m, remember that (external) EMC loads can cause incorrect measured values |
| Parameter | Value |
|---|---|
| Resolution incl. overrange (bit, with sign), max. | 16 bit; 15 bit at 0 ... 10 mA and 60 Hz interference suppression |
| Parameterizable | Yes; none, weak, medium, strong, channel-by-channel |
| Diagnostic alarm | Yes |
| Diagnostics function | Yes |
| Parameter | Value |
|---|---|
| Height | 115 mm |
| Width | 22.5 mm |
| Depth | 138 mm |
| Weight (approx.) | 148 g |
| Parameter | Value |
|---|---|
| Horizontal Installation, Max. | 70 °C; Observe derating |
MPN
6DL1134-6TH00-0PH1