Siemens 6DL1135-6UD00-0PK0
MPN6DL1135-6UD00-0PK0
Active
SIMATIC ET 200SP HA, analog output module, AQ 4XI HART isol suitable for terminal block K0, L0, color code CC00, channel diagnostics, 16-bit, +/-0.1%
$718.82Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Outputs
| Parameter | Value |
|---|---|
| Number of analog outputs | 4 |
| Output range: 0 to 20 mA | Yes; 15 bit |
| Output range: 4 to 20 mA | Yes; 15 bit |
| Load resistance, current outputs, max. | 750 Ω |
| Current output, no-load voltage, max. | 22 V |
| Inductive load, current outputs, max. | 10 mH |
| Cable length, shielded, max. | 1 000 m; with unshielded cables up to 800 m, remember that (external) EMC loads can cause incorrect measured values |
Power
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Power loss (typ.) | 3 W; At 4x 20 mA with 750 ohm load resistor |
| Reverse polarity protection | Yes |
Performance
| Parameter | Value |
|---|---|
| Error, current output (rel. to output range) | 0.1 % |
| Temperature error (rel. to output range) | 0.002 %/K |
| Settling time, resistive load | 1.2 ms; 750 ohm |
| Settling time, inductive load | 1.2 ms |
Diagnostics
| Parameter | Value |
|---|---|
| Supply voltage monitoring | Yes |
| Diagnostics function | Yes |
| Diagnostic interrupt/alarm | Yes |
| Wire-break detection (current outputs) | Yes; channel by channel |
| Short-circuit detection (voltage outputs) | Yes |
Isolation
| Parameter | Value |
|---|---|
| Isolation: channels to backplane bus | 3 000 V DC/1 min, type test |
| Isolation: between channels | 125 V AC / 150 V DC (when using terminal blocks with push-in terminals); SELV/PELV (when using terminal blocks with D-SUB) |
Environmental
| Parameter | Value |
|---|---|
| Operating temperature, horizontal mounting, max. | 70 °C; Observe derating |
| Operating temperature, horizontal mounting, min. | -40 °C |
| Operating temperature, vertical mounting, max. | 60 °C; Observe derating |
| Operating temperature, vertical mounting, min. | -40 °C |
Mechanical
| Parameter | Value |
|---|---|
| Width | 22.5 mm |
| Height | 115 mm |
| Depth | 138 mm |
MPN
6DL1135-6UD00-0PK0