Siemens 6DL1138-6EC00-0EH1
MPN6DL1138-6EC00-0EH1
Active
SIMATIC ET 200SP HA, vibration protection 4xAI, 8xAQ, 4xDI, 6xDI/DQ suitable for terminal block H1, N0 color code CC00,
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jun 2026
Specifications
| Parameter | Value |
|---|---|
| Number of analog outputs | 8; 4 AQ-I, 4 AQ-U |
| Output range: -10 V to +10 V | Yes |
| Output range: 0 to 20 mA | Yes |
| Output range: 4 to 20 mA | Yes |
| Output range: -20 mA to +20 mA | Yes; ±30 mA, ±50 mA |
| Load resistance, current outputs, max. | 330 Ω; 150 ohms at ±50 mA |
| Current output, no-load voltage, max. | 24 V |
| Voltage output, short-circuit current, max. | 10 mA |
| Voltage output, short-circuit protection | Yes; per channel, electronic to chassis |
| Cable length, shielded, max. | 600 m |
| Parameter | Value |
|---|---|
| Resolution (incl. sign, with overrange), max. | 16 bit |
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Permissible range, upper limit (DC) | 28.8 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Power loss (typ.) | 4 W |
| Reverse polarity protection | Yes |
| Parameter | Value |
|---|---|
| Supply voltage monitoring | Yes |
| Diagnostics function | Yes |
| Diagnostic interrupt/alarm | Yes |
| Wire-break detection (current outputs) | Yes; AI 4 ... 20 mA, AQ, DQ, DI 0 ... 3 |
| Parameter | Value |
|---|---|
| Isolation: channels to backplane bus | Yes |
| Isolation test voltage | 1 500 V DC/1 min, type test |
| Parameter | Value |
|---|---|
| Operating temperature, horizontal mounting, max. | 70 °C; Observe derating |
| Operating temperature, horizontal mounting, min. | -40 °C |
| Operating temperature, vertical mounting, max. | 60 °C |
| Operating temperature, vertical mounting, min. | -40 °C |
| Installation altitude, max. | 3 500 m |
| Parameter | Value |
|---|---|
| Width | 22.5 mm |
| Height | 115 mm |
| Depth | 138 mm |
MPN
6DL1138-6EC00-0EH1