Snap-on DIN rail, 4 width units, mixed I/O
It carries 8 digital inputs, two of which can be configured as analog inputs (0 to 10 V), plus 4 relay outputs rated 10 A resistive and 3 A inductive — enough to switch small contactors or pilot lights directly without an interposing relay. The built-in display lets you read I/O states and adjust parameters on the panel door without a laptop — useful for commissioning or fault-finding on a conveyor line.
DC supply, 80 h power reserve, global approvals
Runs on 12 or 24 VDC, with a permissible range of 10.8 to 28.8 VDC — so it handles a sagging battery line or a long cable run without browning out. An 80-hour power reserve keeps the program and retentive data safe when the mains drops; no battery to replace. Approved for UL, CSA, CE, FM, and marine service — the marine stamp means it's accepted on shipboard or offshore installations where vibration and salt fog are the norm. Rated for 0 to 55 °C ambient, so it lives inside a ventilated enclosure in a warm plant room without derating.
Active production — sourced per RFQ
The 6ED1052-1MD00-0BA5 is compatible with the full LOGO! expansion module range (digital, analog, communication) — no adapter needed.