Siemens 6EP1334-2AA01-0AB0
MPN6EP1334-2AA01-0AB0
Active
SITOP smart 240 W Stabilized power supply input: 120/230 V AC, output: DC 24 V/10 A Option for for wall mounting
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026
Specifications
| Parameter | Value |
|---|---|
| Fuse protection type | T 6.3 A/250 V (not accessible) |
| Type of electrical connection | screw-type terminals |
| Type of output voltage setting | via potentiometer |
| Type of the power supply network | 1-phase AC |
| Voltage curve at output | Controlled, isolated DC voltage |
| Adjustable output voltage | 22.8 ... 28 V |
| At rated input voltage 120 | 4.1 A |
| At rated input voltage 230 | 2.4 A |
| Output voltage at DC rated value | 24 V |
| On slow fluctuation of input voltage | 0.1 % |
| Relative overall tolerance of the voltage | 3 % |
| Product function output voltage adjustable | Yes |
All specifications
| Parameter | Value |
|---|---|
| Behavior of the output voltage when switching on | Overshoot of Vout approx. 4 % |
| At rated output voltage for rated value of the output current typical | 27 W |
| Relative control precision of the output voltage with rapid fluctuation of the input voltage by +/- 15% typical | 0.3 % |
| At Short-Circuit during operation | 200 ms |
| Response value current limitation | 12.5 ... 13.5 A |
| Design of Short-Circuit protection | Constant current characteristic |
| On Short-Circuiting during the Start-Up | 100 ms |
| At Short-Circuit during operation typical | 33 A |
| Property of the output Short-Circuit proof | Yes |
| On Short-Circuiting during the Start-Up typical | 30 A |
| Current limitation of inrush current at 25 °C maximum | 65 A |
| Buffering time for rated value of the output current in the event of power failure minimum | 20 ms |
| Supplied active power typical | 288 W |
| Number of Parallel-Switched equipment resources for increasing the power | 2 |
| Line frequency | 47 ... 63 Hz |
| Depth of the enclosure | 125 mm |
| Width of the enclosure | 70 mm |
| Height of the enclosure | 125 mm |
| Product feature of the enclosure housing can be lined up | Yes |
| MTBF at 40 °C | 1 460 803 h |
| CE marking | Yes |
| UL approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| CSA approval | Yes; cULus-Listed (UL 508, CSA C22.2 No. 107.1), File E197259 |
| EAC approval | Yes |
| ULhazloc approval | No |
| Shipbuilding approval | DNV GL |
| Environmental category according to IEC 60721 | Climate class 3K3, 5 … 95% no condensation |
| Top | 50 mm |
| ATEX | No |
| Left | 0 mm |
| IECEx | No |
| Right | 0 mm |
| Bottom | 50 mm |
| DNV GL | Yes |
| 1 at AC | 85 ... 132 V |
| 2 at AC | 170 ... 264 V |
| Typical | 0.8 mA |
| At input | L, N, PE: 1 screw terminal each for 0.5 ... 2.5 mm² single-core/finely stranded |
| At output | L+, M: 2 screw terminals each for 0.5 ... 2.5 mm² |
| NEC class 2 | No |
| Rated range | 0 ... 12 A; 12 A up to +45 °C |
| Rated value | 10 A |
| 1 rated value | 50 Hz |
| 2 rated value | 60 Hz |
| In the feeder | Recommended miniature circuit breaker: from 10 A characteristic C |
| Initial value | Set by means of selector switch on the device |
| During storage | -40 ... +85 °C |
| FM registration | No |
| During operation | 0 ... 60 °C; with natural convection |
| During transport | -40 ... +85 °C |
| Mounting | Wall mounting |
| I2t value maximum | 3.3 A²·s |
| Other information | Specifications at rated input voltage and ambient temperature +25 °C (unless otherwise specified) |
| Galvanic isolation | Safety extra-low output voltage Uout acc. to EN 60950-1 and EN 50178 |
| 1 at AC rated value | 120 V |
| 2 at AC rated value | 230 V |
| Protection class IP | IP20 |
| Bridging of equipment | Yes |
| Efficiency in percent | 90 % |
| Response delay maximum | 0.1 s |
| For emitted interference | EN 55022 Class B |
| Nippon kaiji kyokai | No |
| For interference immunity | EN 61000-6-2 |
| cCSAus, class 1, division 2 | No |
| Load step 100 to 50% typical | 0.2 ms |
| Load step 50 to 100% typical | 0.2 ms |
| At output 1 at DC rated value | 24 V |
| Overvoltage overload capability | 2.3 × Vin rated, 1.3 ms |
| Design of input wide range input | No |
| Lloyds register of shipping | No |
| On slow fluctuation of ohm loading | 0.5 % |
| Operating resource protection class | Class I |
| Design of the overvoltage protection | < 33 V |
| Display version for normal operation | Green LED for 24 V OK |
| French marine classification society | No |
| Operating condition of the mains buffering | at Vin = 93/187 V |
| Galvanic isolation between input and output | Yes |
| American bureau of shipping europe ltd. | No |
MPN
6EP1334-2AA01-0AB0