BOM / RFQ

Siemens 6ES7132-4HB13-0AB0 — Digital Output Modules

Siemens 6ES7132-4HB13-0AB0 Relay Output Module, 5A

MPN6ES7132-4HB13-0AB0

Siemens SIMATIC DP, ET 200S, 2 relay outputs, isolated change-over contacts, 24 V DC / 5 A, 15 mm width.

$275.59Ref. price · indicative, final on quote

Add to RFQ

Siemens 6ES7132-4HB13-0AB0 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7132-4HB13-0AB0 — Outputs
Parameter	Value
Digital outputs	2
Output type	Relays

6ES7132-4HB13-0AB0 — Electrical
Parameter	Value
Rated value (DC)	24 V; From power module
Output current, resistive load, max.	2 Hz
Output current at signal "1" (rated)	5 A; See data in manual
Output current up to 60 °C, max.	4 A; per channel
Power dissipation (typ.)	0.6 W
Inductive shutdown voltage clamp	No
Isolation between channels	Yes
Isolation between channels and backplane bus	Yes

6ES7132-4HB13-0AB0 — Protection & Diagnostics
Parameter	Value
Short-circuit protection	No; The relay outputs must be fused externally with 6 A. When installing in a hazardous area in accordance with the National Electric Code (NEC), the fuse may only be removed using a suitable tool if the module is not in the hazardous area.
Reverse polarity protection	Yes
Diagnostics function	No
Output can drive a digital input	Yes

6ES7132-4HB13-0AB0 — Performance
Parameter	Value
Switching frequency, inductive load, max.	0.5 Hz
Switching frequency, lamp load, max.	2 Hz

6ES7132-4HB13-0AB0 — Mechanical & Connection
Parameter	Value
Cable length, unshielded, max.	600 m
Cable length, shielded, max.	1 000 m
Width	15 mm
Height	81 mm
Depth	52 mm
Weight (approx.)	50 g

Product details

Integration and Qualification Notes

The Siemens 6ES7132-4HB13-0AB0 relay output module for ET 200S is a current-production component, qualifiable and traceable within the SIMATIC DP system. Galvanic isolation between channels and to the backplane bus supports channel-to-channel separation requirements. On CPU/Master stop, the module can either substitute a configured value (0 or 1) or keep the last value, providing a deterministic fail-state for qualification protocols.

Sourcing and Protective Documentation

No internal short-circuit protection is provided; the relay outputs must be fused externally with 6 A. The fuse selection and removal tool must be documented per site safety procedures, especially in hazardous locations per NEC.