Siemens SIMATIC ET 200SP, 6ES7132-6BF00-2BA0, digital output module (DQ Yes), 24 V DC, 4 A max per channel at 60 °C, 15 mm width, 28 g.
Siemens 6ES7132-6BF00-2BA0 ET 200SP DQ Module, 4A
MPN6ES7132-6BF00-2BA0
Siemens SIMATIC ET 200SP, 6ES7132-6BF00-2BA0, digital output module (DQ Yes), 24 V DC, 4 A max per channel at 60 °C, 15 mm width, 28 g.
$133.00Ref. price · indicative, final on quote
StockContact for availability
MOQ1 pcs
Sourced new & surplus through independent channelsListing updated Jun 2026
Specifications
Outputs
| Parameter | Value |
|---|---|
| Digital outputs | 8 |
| Output type | Source output (PNP, current-sourcing) |
Electrical
| Parameter | Value |
|---|---|
| Rated value (DC) | 24 V |
| Output current, resistive load, max. | 100 Hz |
| Output current at signal "1" (rated) | 0.5 A |
| Total output current per module, max. | 4 A |
| Permissible range, upper limit (DC) | 28.8 V |
| Permissible range, lower limit (DC) | 19.2 V |
| Residual current at signal "0", max. | 0.1 mA |
| Output current up to 60 °C, max. | 4 A |
| Power dissipation (typ.) | 1 W |
| Inductive shutdown voltage clamp | Typ. L+ (-50 V) |
| Load resistance, upper limit | 12 kΩ |
| Load resistance, lower limit | 48 Ω |
| Isolation between channels | No |
| Isolation between channels and backplane bus | Yes |
| Isolation test voltage | 707 V DC (type test) |
Protection & Diagnostics
| Parameter | Value |
|---|---|
| Short-circuit protection | Yes |
| Reverse polarity protection | Yes |
| Diagnostics function | Yes |
| Diagnostic alarm | Yes |
| Short-circuit response threshold (typ.) | 0.7 to 1.3 A |
| Short-circuit detection | Yes; Module-wise |
| Wire-break detection | Yes; Module-wise |
| Redundant load control | Yes |
| Output can drive a digital input | Yes |
Performance
| Parameter | Value |
|---|---|
| Output switching delay 0 to 1, max. | 50 µs; at rated load |
| Output switching delay 1 to 0, max. | 100 µs; at rated load |
| Switching frequency, inductive load, max. | 2 Hz |
| Switching frequency, lamp load, max. | 10 Hz |
Environmental
| Parameter | Value |
|---|---|
| Operating temperature, horizontal mount, max. | 60 °C |
| Operating temperature, horizontal mount, min. | 0 °C |
Mechanical & Connection
| Parameter | Value |
|---|---|
| Cable length, unshielded, max. | 600 m |
| Cable length, shielded, max. | 1 000 m |
| Width | 15 mm |
| Height | 73 mm |
| Depth | 58 mm |
| Weight (approx.) | 28 g |
Product details
Frequently asked questions
Can this module replace the 6ES7522-1BH01-0AB0 in an S7-1500 rack?
No—the 6ES7132-6BF00-2BA0 is built for the ET 200SP system (15 mm backplane, BU type A0) while the 6ES7522-1BH01-0AB0 mounts in the S7-1500 rack. They are not mechanically or electrically interchangeable. If your rack is ET 200SP, this module is the correct choice.
Does the module have diagnostics for wire break or short circuit?
Yes—module-wise diagnostics for wire break (load resistance outside 48 Ω to 12 kΩ range) and short-circuit. It also supports a diagnostic alarm and group error indication. No channel-to-channel isolation, though.
MPN
6ES7132-6BF00-2BA0