What you're looking at
The 6ES7132-6BF00-2CA0: This is a current-production ET 200SP DQ module — four 24 V outputs rated 4 A each, with per-channel diagnostic coverage. It mounts on a BU type A0 base unit, occupies 15 mm of DIN rail, and supports isochronous mode for applications needing deterministic output timing. Wire-break and short-circuit detection is per channel, so a single pulled wire flags the group error without taking down the other three outputs.
Still in active production
You can spec it into a new BOM line without an LTB clock running. If you're replacing a failed module on an existing ET 200SP station, the form factor and connection plan are unchanged: same BU type A0, same wiring scheme.
Fits only BU type A0 base units. Two-wire sensors connect directly; three-wire adds AUX terminals or a potential distributor module; four-wire needs the potential distributor as well. The module reads its encoding automatically — no DIP switches to set. HW functional status from FS07 means a firmware update can be done without removing the module. Keep the original packaging if you need to return a unit — it's a slim 15 mm profile that can get bent in a bulk box.
Sourcing this line item
The 6ES7132-6BF00-2CA0 is a current-production module. We quote to order against your RFQ.