Skip to main content
Log in
Siemens 6ES7132-6BF01-2AA0 — Digital Output Modules

Siemens 6ES7132-6BF01-2AA0 ET200SP DQ Module, 24V 4A

MPN6ES7132-6BF01-2AA0
Active

Siemens SIMATIC ET 200SP, DQ digital output module, 24 V DC, 4 A per channel, width 15 mm, switching times 100/150 µs, diagnostic alarm, group error.

$48.26 – $141.71Ref. price · indicative, final on quote
Siemens 6ES7132-6BF01-2AA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7132-6BF01-2AA0 — Outputs
ParameterValue
Digital outputs8
Output typeSource output (PNP, current-sourcing)
6ES7132-6BF01-2AA0 — Electrical
ParameterValue
Rated value (DC)24 V
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)0.5 A
Output current, max. per circuit / per module0.5 A
Total output current per module, max.4 A
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Residual current at signal "0", max.10 µA
Output current up to 60 °C, max.4 A
Power dissipation (typ.)1 W
Inductive shutdown voltage clampTyp. L+ (-50 V)
Load resistance, upper limit100 kΩ
Load resistance, lower limit48 Ω
Isolation between channelsNo
Isolation between channels and backplane busYes
Isolation test voltage707 V DC (type test)
6ES7132-6BF01-2AA0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes; per channel, electronic
Reverse polarity protectionYes
Diagnostics functionYes
Diagnostic alarmYes
Short-circuit response threshold (typ.)1 A
Short-circuit detectionNo
Wire-break detectionNo
Redundant load controlYes
Output can drive a digital inputYes
6ES7132-6BF01-2AA0 — Performance
ParameterValue
Output switching delay 0 to 1, max.100 µs; at rated load
Output switching delay 1 to 0, max.150 µs; at rated load
Switching frequency, inductive load, max.2 Hz
Switching frequency, lamp load, max.10 Hz
6ES7132-6BF01-2AA0 — Environmental
ParameterValue
Operating temperature, horizontal mount, max.60 °C
Operating temperature, horizontal mount, min.-30 °C; < 0 °C as of FS02
6ES7132-6BF01-2AA0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)30 g

Product details

Digital output module for ET 200SP

The Siemens 6ES7132-6BF01-2AA0 is a 2-channel digital output module for the ET 200SP distributed I/O system. It switches 24 V DC loads at up to 4 A per channel continuously at ambient temperatures to 60 °C. Turn-on transition is within 100 µs at rated load; turn-off within 150 µs. Typical power loss is 1 W. Diagnostic alarm is enabled, but only as a group error — no per-channel fault indication or short-circuit detection.

Wiring and base unit compatibility

Mounts on a BaseUnit type A0. For 2-wire loads, the standard base unit suffices. 3-wire loads require a BU type A0 with AUX terminals or a separate potential distributor module. 4-wire loads require a BU type A0 plus a potential distributor. Shielded cable runs up to 1 000 m; unshielded up to 600 m.

Frequently asked questions

What diagnostic functions does the 6ES7132-6BF01-2AA0 provide?

It supports a diagnostic alarm and a group error output, but does not offer per-channel diagnostics or short-circuit indication.

Can the 6ES7132-6BF01-2AA0 be used in a 4-wire configuration?

Yes, with a BaseUnit type A0 and an additional potential distributor module.

MPN
6ES7132-6BF01-2AA0