Skip to main content
Log in
Siemens 6ES7132-6BF61-0AA0 — Digital Output Modules

Siemens 6ES7132-6BF61-0AA0 ET 200SP DQ, 24 V DC, 4 A

MPN6ES7132-6BF61-0AA0
Active

Siemens ET 200SP, Digital Output Module (DQ), 6ES7132-6BF61-0AA0, 24 V DC, 4 A, BU type A0, 58 mm depth.

$52.07Ref. price · indicative, final on quote
Siemens 6ES7132-6BF61-0AA0 datasheet (PDF)
Source DocumentedChannel stated on listing & quote
Condition PhotosReal unit photos / video on request
WhatsApp AnswersFast human replies for machine-down parts
Worldwide DispatchDHL/FedEx — transit quoted per order
Independent China distributor & sourcing agent· Listing updated Sep 2026

Specifications

6ES7132-6BF61-0AA0 — Outputs
ParameterValue
Digital outputs8
Output typeSink output (NPN)
6ES7132-6BF61-0AA0 — Electrical
ParameterValue
Rated value (DC)24 V
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)0.5 A
Output current, max. per circuit / per module0.5 A
Total output current per module, max.4 A
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Residual current at signal "0", max.5 µA
Output current up to 60 °C, max.4 A
Power dissipation (typ.)1.5 W
Inductive shutdown voltage clampTyp. 47 V
Load resistance, upper limit3 400 Ω
Load resistance, lower limit48 Ω
Isolation between channelsNo
Isolation between channels and backplane busYes
Isolation test voltage707 V DC (type test)
6ES7132-6BF61-0AA0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes
Diagnostics functionYes
Diagnostic alarmYes
Short-circuit response threshold (typ.)1.5 A
Short-circuit detectionNo
Wire-break detectionNo
Redundant load controlYes
Output can drive a digital inputYes
6ES7132-6BF61-0AA0 — Performance
ParameterValue
Output switching delay 0 to 1, max.300 µs
Output switching delay 1 to 0, max.600 µs
Switching frequency, inductive load, max.0.5 Hz
Switching frequency, lamp load, max.10 Hz
6ES7132-6BF61-0AA0 — Environmental
ParameterValue
Operating temperature, horizontal mount, max.60 °C
Operating temperature, horizontal mount, min.-25 °C
6ES7132-6BF61-0AA0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)30 g

Product details

What this module is

The 6ES7132-6BF61-0AA0: This is a 1-byte (8-channel) DQ module for the ET 200SP distributed I/O system. Each channel sinks 24 V DC at up to 4 A continuously to 60 °C. Switching time is 300 µs on, 600 µs off. It mates with BU type A0 base units and communicates over the ET 200SP backplane.

Comparing with 6ES7522-1BH01-0AB0

Both are 24 V DC current-sinking modules. The 6ES7522-1BH01-0AB0 provides 16 channels; the ET 200SP unit has a 15 mm width and requires BU type A0 base units.

Frequently asked questions

What does MSO = No mean?

MSO (Multiswitch Output) is not supported on this module. It is a standard DQ module without multiswitch capability.

Will 6ES7132-6BF61-0AA0 drop into a panel wired for 6ES7522-1BH01-0AB0?

No — the two modules use different backplanes. The 6ES7132-6BF61-0AA0 is designed for ET 200SP base units (BU type A0), while the 6ES7522-1BH01-0AB0 mounts on the S7-1500 rack. A panel built for the S7-1500 would need a different bus coupler and mounting hardware.

MPN
6ES7132-6BF61-0AA0