Skip to main content
Log in
Siemens 6ES7132-6BH01-2BA0 — Digital Output Modules

Siemens 6ES7132-6BH01-2BA0 ET 200SP DQ Module, 24V DC

MPN6ES7132-6BH01-2BA0
Active

Siemens 6ES7132-6BH01-2BA0, SIMATIC ET 200SP, Digital Output Module (DQ), 8 channels, 24V DC, current-sourcing, width 15 mm, depth 58 mm, height 73 mm, diagnostics, wire-break detection, active lifecycle.

$74.93 – $203.35Ref. price · indicative, final on quote
Siemens 6ES7132-6BH01-2BA0 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7132-6BH01-2BA0 — Outputs
ParameterValue
Digital outputs16
Output typeSource output (PNP, current-sourcing)
6ES7132-6BH01-2BA0 — Electrical
ParameterValue
Rated value (DC)24 V
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)0.5 A
Total output current per module, max.8 A
Permissible range, upper limit (DC)28.8 V
Permissible range, lower limit (DC)19.2 V
Residual current at signal "0", max.0.1 mA
Output current up to 60 °C, max.4 A
Power dissipation (typ.)1 W
Inductive shutdown voltage clampTyp. L+ (-50 V)
Load resistance, upper limit12 kΩ
Load resistance, lower limit48 Ω
Isolation between channelsNo
Isolation between channels and backplane busYes
Isolation test voltage707 V DC (type test)
6ES7132-6BH01-2BA0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes
Reverse polarity protectionYes
Diagnostics functionYes
Diagnostic alarmYes
Short-circuit response threshold (typ.)1 A; 0.7 to 1.3 A
Wire-break detectionYes; Module-wise
Redundant load controlYes
Output can drive a digital inputYes
6ES7132-6BH01-2BA0 — Performance
ParameterValue
Switching frequency, inductive load, max.2 Hz
Switching frequency, lamp load, max.10 Hz
6ES7132-6BH01-2BA0 — Environmental
ParameterValue
Operating temperature, horizontal mount, max.60 °C
Operating temperature, horizontal mount, min.-30 °C; < 0 °C as of FS03
6ES7132-6BH01-2BA0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width15 mm
Height73 mm
Depth58 mm
Weight (approx.)30 g

Product details

8-channel digital output module for ET 200SP

The 6ES7132-6BH01-2BA0: Module-level diagnostic alarm, short-circuit to L+ and to M, and wire-break detection (per module) are built in, saving panel space you'd otherwise spend on external monitoring relays.

Mounting and base unit requirements

Requires BU type A0 base unit (the one with the 1-wire connection). That base unit carries the module and the bus connection — without it the module won't seat. For 2-wire, 3-wire, or 4-wire sensors, you also need the potential distributor module alongside the base unit. Automatic encoding means you don't set address switches; the base unit does the addressing.

Sourced to order through our channel. This ET 200SP module requires a BU type A0 base unit and is mechanically incompatible with the 6ES7522-1BH01-0AB0.

Frequently asked questions

Will this module drop into a panel that was built with the 6ES7522-1BH01-0AB0?

No. The 6ES7132-6BH01-2BA0 is an ET 200SP module requiring a BU type A0 base unit and the ET 200SP backplane bus. The 6ES7522-1BH01-0AB0 is a standard S7-1500 output module that mounts directly on the S7-1500 rack. They are mechanically incompatible without replacing the entire I/O rack.

MPN
6ES7132-6BH01-2BA0