Skip to main content
Log in
Siemens 6ES7132-6FD00-0BB1 — Digital Output Modules

Siemens 6ES7132-6FD00-0BB1 Digital Output Module, 8 DQ, 2 A

MPN6ES7132-6FD00-0BB1
Active

Siemens ET 200SP digital output module, 8 DQ, 24-230 V AC, 2 A, BU type B1, 20 mm width.

$82.30 – $229.85Ref. price · indicative, final on quote
Siemens 6ES7132-6FD00-0BB1 datasheet (PDF)
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7132-6FD00-0BB1 — Outputs
ParameterValue
Digital outputs4
Output typeTriac with zero point detection
6ES7132-6FD00-0BB1 — Electrical
ParameterValue
Output current, resistive load, max.10 Hz
Output current at signal "1" (rated)2 A
Output current, max. per circuit / per module2 A
Total output current per module, max.8 A
Output voltage at signal "1" (min.)20.4 V
Residual current at signal "0", max.460 µA
Output current up to 60 °C, max.4 A
Power dissipation (typ.)9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz
Isolation between channelsNo
Isolation between channels and backplane busYes
Isolation test voltage2 545 V DC/2 s (routine test)
6ES7132-6FD00-0BB1 — Protection & Diagnostics
ParameterValue
Short-circuit protectionNo; When using BU type B1, a miniature, quick-response fuse with 10 A tripping current must be provided
Diagnostics functionNo
Diagnostic alarmNo
Short-circuit detectionNo
Wire-break detectionNo
Redundant load controlYes
Output can drive a digital inputYes
6ES7132-6FD00-0BB1 — Performance
ParameterValue
Output switching delay 0 to 1, max.10 ms
Output switching delay 1 to 0, max.10 ms
Switching frequency, inductive load, max.0.5 Hz; Higher frequencies are possible, see Equipment Manual / Product Information
Switching frequency, lamp load, max.1 Hz
6ES7132-6FD00-0BB1 — Environmental
ParameterValue
Operating temperature, horizontal mount, max.60 °C
Operating temperature, horizontal mount, min.-30 °C
6ES7132-6FD00-0BB1 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.600 m
Cable length, shielded, max.1 000 m
Width20 mm
Height73 mm
Depth58 mm
Weight (approx.)50 g

Product details

Module function and key ratings

The Siemens 6ES7132-6FD00-0BB1 is an ET 200SP digital output slice providing 8 channels of source-type (current-sourcing) outputs rated from 24 V AC to 230 V AC, 2 A per channel. It confirms digital output (DQ) capability without MSO (modular software override) or PWM support. Horizontal DIN-rail mounting on a BU type B1 base unit (20 mm wide, 73 mm tall, 58 mm deep). The compact width leaves room for additional slices in high-density ET 200SP stations.

Load derating and cable limits

Switching times for signal transitions (0→1 and 1→0) are both ≤ 10 ms. Maximum lamp-load switching frequency is 1 Hz. Unshielded cable runs up to 600 m; shielded runs up to 1 000 m. The module is electrically isolated to 2 545 V DC for 2 s as routine test.

Frequently asked questions

What does MSO No mean?

MSO No means the module does not support Modular Software Override. This limits certain safety-oriented CPU configurations that rely on MSO for channel-level partial shutdown.

How do I source this module?

This module is active and sourced to order against a buyer's RFQ. Submit a request for a quotation through the standard industrial automation distribution channel.

MPN
6ES7132-6FD00-0BB1