BOM / RFQ

Siemens 6ES7134-6JD00-0DA1 — Analog Input Modules

Siemens 6ES7134-6JD00-0DA1 Analog Input Module, 16-bit

Q: What thermocouple types does this module support?

It supports types B, C, E, J, K, L, N, R, S, T, and U, all at 16-bit resolution including sign.

Q: What is the maximum cable length for thermocouple inputs?

For thermocouples, shielded cable is limited to 100 m; for other signals it can be up to 200 m.

MPN6ES7134-6JD00-0DA1

Active

Siemens SIMATIC ET 200SP, 6ES7134-6JD00-0DA1, Analog Input Module, 4 AI, 4- or 2-wire, thermocouple/mV, 16-bit, MSI Yes.

$175.26 – $521.27Ref. price · indicative, final on quote

Add to RFQ

Siemens 6ES7134-6JD00-0DA1 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7134-6JD00-0DA1 — Inputs & Signal Ranges
Parameter	Value
Number of analog inputs	4
Input range: -80 to +80 mV	Yes; 16 bit incl. sign
Permissible input voltage, max. (destruction limit)	30 V
Max. shielded signal cable length	200 m; 100 m for thermocouples

6ES7134-6JD00-0DA1 — Measurement Performance
Parameter	Value
Resolution (bit incl. sign), max.	16 bit
Measurement principle	integrating (Sigma-Delta)
Temperature measurement error (±)	0.005 %/K
Voltage measurement error (±)	0.05 %; 0.2 % when SFU OFF
Interference voltage suppression (at interference frequency)	16.6 / 50 / 60 Hz / off
Common-mode interference suppression, min.	90 dB
Common-mode voltage, max.	60 V; DC

6ES7134-6JD00-0DA1 — Diagnostics & Monitoring
Parameter	Value
Wire-break detection	Yes; channel by channel
Diagnostic alarm	Yes
Diagnostics function	Yes
Limit value alarm	Yes; two upper and two lower limit values in each case
Supply voltage monitoring	Yes

6ES7134-6JD00-0DA1 — Isolation
Parameter	Value
Isolation: channels to backplane bus	Yes
Isolation: between channels	No
Isolation test voltage	707 V DC (type test)

6ES7134-6JD00-0DA1 — Power
Parameter	Value
Rated value (DC)	24 V
Power loss, typ.	0.9 W
Reverse polarity protection	Yes

6ES7134-6JD00-0DA1 — Environmental
Parameter	Value
Operating temperature, horizontal mounting, max.	60 °C
Operating temperature, horizontal mounting, min.	-30 °C; < 0 °C as of FS02
Operating temperature, vertical mounting, max.	50 °C
Operating temperature, vertical mounting, min.	-30 °C; < 0 °C as of FS02

6ES7134-6JD00-0DA1 — Mechanical
Parameter	Value
Width	15 mm
Height	73 mm
Depth	58 mm
Weight, approx.	33 g

Product details

Wiring and integration

The 6ES7134-6JD00-0DA1: Parameterizable wire-break detection per channel and group error alarm are built in. Diagnostic alarm and limit value alarm (two upper, two lower) are configurable. I&M data from I&M0 to I&M3 is supported for asset management.