BOM / RFQ

Siemens 6ES7134-6PA00-0CU0 — Analog Input Modules

Siemens 6ES7134-6PA00-0CU0 ET 200SP AI, 4x5 A, 230 V

MPN6ES7134-6PA00-0CU0

Obsolete

Siemens ET 200SP analog input module, 6ES7134-6PA00-0CU0, 4 AI 2-wire, 4x5 A, 230 V AC, width 20 mm.

Add to RFQ

Siemens 6ES7134-6PA00-0CU0 datasheet (PDF)

Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Jul 2026

Specifications

6ES7134-6PA00-0CU0 — Inputs & Signal Ranges
Parameter	Value
Max. shielded signal cable length	200 m

6ES7134-6PA00-0CU0 — Diagnostics & Monitoring
Parameter	Value
Diagnostic alarm	Yes
Limit value alarm	Yes

6ES7134-6PA00-0CU0 — Isolation
Parameter	Value
Isolation: channels to backplane bus	Yes
Isolation: between channels	No
Isolation test voltage	Between channels and backplane bus, 24 V supply: Routine test, 1 920 V AC, 2 s; between backplane bus and 24 V supply: Type test, 707 V DC

6ES7134-6PA00-0CU0 — Power
Parameter	Value
Power loss, typ.	1.4 W; 4x 5 A input current, 3x 230 V AC

6ES7134-6PA00-0CU0 — Environmental
Parameter	Value
Operating temperature, horizontal mounting, max.	60 °C
Operating temperature, horizontal mounting, min.	0 °C; On request: Ambient temperatures lower than 0 °C (without condensation)
Operating temperature, vertical mounting, max.	50 °C
Operating temperature, vertical mounting, min.	0 °C; On request: Ambient temperatures lower than 0 °C (without condensation)

6ES7134-6PA00-0CU0 — Mechanical
Parameter	Value
Width	20 mm
Height	73 mm
Depth	58 mm

Product details

The Siemens 6ES7134-6PA00-0CU0 is an ET 200SP analog input module that measures four 2-wire current inputs, each rated up to 5 A at 230 V AC. Typical power draw sits at 1.4 W under full load. It occupies a single 20 mm-wide slot on a BU type U0 base unit. Firmware version V6.0 is loaded at the factory and can be updated in the field. The module reports I&M data up to I&M3 and generates diagnostic alarms, limit value alarms, and hardware interrupts for monitoring up to 16 freely selectable process values. Cable runs — shielded or unshielded — are limited to 200 m.

Sourcing reality

Availability is standard lead-time; we can quote against an RFQ for firm pricing and delivery. Because the module uses a BU type U0 base unit, make sure that base unit is also on the BOM — it's not the same as the BU type A0 or B0 used by other ET 200SP analog modules.