Skip to main content
Siemens 6ES7142-1BD30-0XA0 — Digital Output Modules

6ES7142-1BD30-0XA0 SIMATIC DP EM 142 4 DO DC 24V/0.5A M12 IP

MPN6ES7142-1BD30-0XA0

Siemens SIMATIC DP EM 142 expansion module, 6ES7142-1BD30-0XA0, 4 digital outputs DC 24 V / 0.5 A, M12, IP65, 55 mm depth.

$109.73Ref. price · indicative, final on quote
Sourced new & surplus through independent channelsAuthenticity-screened · ESD-safe packingListing updated Aug 2026

Specifications

6ES7142-1BD30-0XA0 — Outputs
ParameterValue
Digital outputs4
6ES7142-1BD30-0XA0 — Electrical
ParameterValue
Output current, resistive load, max.100 Hz
Output current at signal "1" (rated)0.5 A; at 24 V DC
Output current, max. per circuit / per module0.6 A
Output voltage at signal "1" (min.)2L+ (-0,8 V)
Residual current at signal "0", max.0.1 mA
Current consumption from backplane bus (5 V DC), max.28.5 mA
Power dissipation (typ.)1.2 W
Inductive shutdown voltage clampTyp. (2L+) -47 V
Load resistance, upper limit4 kΩ
Load resistance, lower limit48 Ω
Isolation between channelsNo
Isolation test voltage500 V DC
6ES7142-1BD30-0XA0 — Protection & Diagnostics
ParameterValue
Short-circuit protectionYes; Electronic
Short-circuit response threshold (typ.)1 A
Redundant load controlYes; only outputs of the same group
Output can drive a digital inputYes
6ES7142-1BD30-0XA0 — Performance
ParameterValue
Switching frequency, lamp load, max.1 Hz
6ES7142-1BD30-0XA0 — Mechanical & Connection
ParameterValue
Cable length, unshielded, max.30 m
Width87 mm; Width module 60 mm
Height110 mm
Depth55 mm
Weight (approx.)250 g

Product details

The 6ES7142-1BD30-0XA0: This is a spare-part listing for the SIMATIC DP EM 142 output block—4 digital outputs at 0.5 A each, M12 connector, IP65, and made for the ET 200X distributed system where you need dry-area protection. Lifecycle is current, so it's not a scavenger hunt—still rolling off the line.

Each output handles 0.5 A at 24 V DC, but the module's total is derated to 2 A at 55 °C—watch your group load if the panel runs hot. Short-circuit protection is electronic; the response threshold trips typically at 1 A. Switching frequency hits 100 Hz on resistive loads, but drops to 1 Hz on lamp loads—inductive or incandescent, that's your limiter. Unshielded cable runs up to 30 m, fine for local I/O.

Described as a spare part but lifecycle is current—Siemens still runs this line. We quote against RFQ; typical lead time mirrors the current production schedule. No LTB or EOL announced.

Frequently asked questions

What is the depth and width of this module?

Depth is 55 mm; width is 87 mm with a module width of 60 mm.

Will 6ES7142-1BD30-0XA0 drop into a panel specified for 6ES7148-4FA00-0AB0?

No, 6ES7148-4FA00-0AB0 is a 16-digital-input module, not an output module. This output block has different wiring and function.

MPN
6ES7142-1BD30-0XA0